[PATCH] net/mlx5: remove "default n" from Kconfig
From: Cai Huoqing <hidden>
Date: 2021-06-17 02:48:02
Also in:
linux-rdma
Subsystem:
mellanox mlx5 core vpi driver, networking drivers, the rest · Maintainers:
Saeed Mahameed, Leon Romanovsky, Tariq Toukan, Mark Bloch, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: caihuoqing <redacted> remove "default n" and "No" is default Signed-off-by: caihuoqing <redacted> --- drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 9 --------- 1 file changed, 9 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
index d62f90aedade..e1a5a79e27c7 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig@@ -12,7 +12,6 @@ config MLX5_CORE depends on MLXFW || !MLXFW depends on PTP_1588_CLOCK || !PTP_1588_CLOCK depends on PCI_HYPERV_INTERFACE || !PCI_HYPERV_INTERFACE - default n help Core driver for low level functionality of the ConnectX-4 and Connect-IB cards by Mellanox Technologies.
@@ -36,7 +35,6 @@ config MLX5_CORE_EN depends on NETDEVICES && ETHERNET && INET && PCI && MLX5_CORE select PAGE_POOL select DIMLIB - default n help Ethernet support in Mellanox Technologies ConnectX-4 NIC.
@@ -141,7 +139,6 @@ config MLX5_CORE_EN_DCB config MLX5_CORE_IPOIB bool "Mellanox 5th generation network adapters (connectX series) IPoIB offloads support" depends on MLX5_CORE_EN - default n help MLX5 IPoIB offloads & acceleration support.
@@ -149,7 +146,6 @@ config MLX5_FPGA_IPSEC bool "Mellanox Technologies IPsec Innova support" depends on MLX5_CORE depends on MLX5_FPGA - default n help Build IPsec support for the Innova family of network cards by Mellanox Technologies. Innova network cards are comprised of a ConnectX chip
@@ -163,7 +159,6 @@ config MLX5_IPSEC depends on XFRM_OFFLOAD depends on INET_ESP_OFFLOAD || INET6_ESP_OFFLOAD select MLX5_ACCEL - default n help Build IPsec support for the Connect-X family of network cards by Mellanox Technologies.
@@ -176,7 +171,6 @@ config MLX5_EN_IPSEC depends on XFRM_OFFLOAD depends on INET_ESP_OFFLOAD || INET6_ESP_OFFLOAD depends on MLX5_FPGA_IPSEC || MLX5_IPSEC - default n help Build support for IPsec cryptography-offload acceleration in the NIC. Note: Support for hardware with this capability needs to be selected
@@ -189,7 +183,6 @@ config MLX5_FPGA_TLS depends on MLX5_CORE_EN depends on MLX5_FPGA select MLX5_EN_TLS - default n help Build TLS support for the Innova family of network cards by Mellanox Technologies. Innova network cards are comprised of a ConnectX chip
@@ -204,7 +197,6 @@ config MLX5_TLS depends on MLX5_CORE_EN select MLX5_ACCEL select MLX5_EN_TLS - default n help Build TLS support for the Connect-X family of network cards by Mellanox Technologies.
@@ -227,7 +219,6 @@ config MLX5_SW_STEERING config MLX5_SF bool "Mellanox Technologies subfunction device support using auxiliary device" depends on MLX5_CORE && MLX5_CORE_EN - default n help Build support for subfuction device in the NIC. A Mellanox subfunction device can support RDMA, netdevice and vdpa device.
--
2.22.0