[PATCH v2 net-next 2/8] net: phy: correct format of block comments
From: Weihang Li <hidden>
Date: 2021-06-16 10:04:55
Subsystem:
ethernet phy library, networking drivers, sff/sfp/sfp+ module support, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Russell King, Linus Torvalds
From: Wenpeng Liang <redacted> Block comments should not use a trailing */ on a separate line and every line of a block comment should start with an '*'. Signed-off-by: Wenpeng Liang <redacted> Signed-off-by: Weihang Li <redacted> --- drivers/net/phy/lxt.c | 4 ++-- drivers/net/phy/national.c | 6 ++++-- drivers/net/phy/phy-core.c | 3 ++- drivers/net/phy/phylink.c | 9 ++++++--- drivers/net/phy/vitesse.c | 3 ++- 5 files changed, 16 insertions(+), 9 deletions(-)
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index bde3356..e3bf827 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c@@ -242,8 +242,8 @@ static int lxt973a2_read_status(struct phy_device *phydev) return lpa; /* If both registers are equal, it is suspect but not - * impossible, hence a new try - */ + * impossible, hence a new try + */ } while (lpa == adv && retry--); mii_lpa_to_linkmode_lpa_t(phydev->lp_advertising, lpa);
diff --git a/drivers/net/phy/national.c b/drivers/net/phy/national.c
index 46160ba..9ae9cc6b 100644
--- a/drivers/net/phy/national.c
+++ b/drivers/net/phy/national.c@@ -68,7 +68,8 @@ static int ns_ack_interrupt(struct phy_device *phydev) return ret; /* Clear the interrupt status bit by writing a “1” - * to the corresponding bit in INT_CLEAR (2:0 are reserved) */ + * to the corresponding bit in INT_CLEAR (2:0 are reserved) + */ ret = phy_write(phydev, DP83865_INT_CLEAR, ret & ~0x7); return ret;
@@ -150,7 +151,8 @@ static int ns_config_init(struct phy_device *phydev) { ns_giga_speed_fallback(phydev, ALL_FALLBACK_ON); /* In the latest MAC or switches design, the 10 Mbps loopback - is desired to be turned off. */ + * is desired to be turned off. + */ ns_10_base_t_hdx_loopack(phydev, hdx_loopback_off); return ns_ack_interrupt(phydev); }
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index 8d333d3..2870c33 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c@@ -76,7 +76,8 @@ EXPORT_SYMBOL_GPL(phy_duplex_to_str); /* A mapping of all SUPPORTED settings to speed/duplex. This table * must be grouped by speed and sorted in descending match priority - * - iow, descending speed. */ + * - iow, descending speed. + */ #define PHY_SETTING(s, d, b) { .speed = SPEED_ ## s, .duplex = DUPLEX_ ## d, \ .bit = ETHTOOL_LINK_MODE_ ## b ## _BIT}
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 8ce8db4..35f22a9 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c@@ -182,7 +182,8 @@ static int phylink_parse_fixedlink(struct phylink *pl, pl->link_config.duplex = DUPLEX_FULL; /* We treat the "pause" and "asym-pause" terminology as - * defining the link partner's ability. */ + * defining the link partner's ability. + */ if (fwnode_property_read_bool(fixed_node, "pause")) __set_bit(ETHTOOL_LINK_MODE_Pause_BIT, pl->link_config.lp_advertising);
@@ -685,7 +686,8 @@ static void phylink_resolve(struct work_struct *w) phylink_mac_pcs_get_state(pl, &link_state); /* If we have a phy, the "up" state is the union of - * both the PHY and the MAC */ + * both the PHY and the MAC + */ if (pl->phydev) link_state.link &= pl->phy_state.link;
@@ -694,7 +696,8 @@ static void phylink_resolve(struct work_struct *w) link_state.interface = pl->phy_state.interface; /* If we have a PHY, we need to update with - * the PHY flow control bits. */ + * the PHY flow control bits. + */ link_state.pause = pl->phy_state.pause; mac_config = true; }
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 16704e2..897b979 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c@@ -249,7 +249,8 @@ static int vsc73xx_config_aneg(struct phy_device *phydev) /* This adds a skew for both TX and RX clocks, so the skew should only be * applied to "rgmii-id" interfaces. It may not work as expected - * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces. */ + * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces. + */ static int vsc8601_add_skew(struct phy_device *phydev) { int ret;
--
2.8.1