[PATCH net-next 3/5] igc: Remove unused MDICNFG register
From: Tony Nguyen <anthony.l.nguyen@intel.com>
Date: 2021-06-04 16:21:58
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Sasha Neftin <redacted> The MDICNFG register from igc registers is not used so remove it. Signed-off-by: Sasha Neftin <redacted> Tested-by: Dvora Fuxbrumer <redacted> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> --- drivers/net/ethernet/intel/igc/igc_regs.h | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_regs.h b/drivers/net/ethernet/intel/igc/igc_regs.h
index cc174853554b..2491d565d758 100644
--- a/drivers/net/ethernet/intel/igc/igc_regs.h
+++ b/drivers/net/ethernet/intel/igc/igc_regs.h@@ -10,7 +10,6 @@ #define IGC_EECD 0x00010 /* EEPROM/Flash Control - RW */ #define IGC_CTRL_EXT 0x00018 /* Extended Device Control - RW */ #define IGC_MDIC 0x00020 /* MDI Control - RW */ -#define IGC_MDICNFG 0x00E04 /* MDC/MDIO Configuration - RW */ #define IGC_CONNSW 0x00034 /* Copper/Fiber switch control - RW */ #define IGC_I225_PHPM 0x00E14 /* I225 PHY Power Management */ #define IGC_GPHY_VERSION 0x0001E /* I225 gPHY Firmware Version */
--
2.26.2