Re: [PATCH v3 net-next 0/8] Part 2 of SJA1105 DSA driver preparation for new switch introduction (SJA1110)

Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Mon, 31 May 2021 01:59:31 +0300 you wrote:

From: Vladimir Oltean <vladimir.oltean@nxp.com>

This series is a continuation of:
https://patchwork.kernel.org/project/netdevbpf/cover/20210524131421.1030789-1-olteanv@gmail.com/

even though it isn't the first time these patches are submitted (they
were part of the group previously called "Add NXP SJA1110 support to the
sja1105 DSA driver"):
https://patchwork.kernel.org/project/netdevbpf/cover/20210526135535.2515123-1-vladimir.oltean@nxp.com/

[...]

Here is the summary with links:
  - [v3,net-next,1/8] net: dsa: sja1105: be compatible with "ethernet-ports" OF node name
    https://git.kernel.org/netdev/net-next/c/15074a361fee
  - [v3,net-next,2/8] net: dsa: sja1105: allow SGMII PCS configuration to be per port
    https://git.kernel.org/netdev/net-next/c/84db00f2c043
  - [v3,net-next,3/8] net: dsa: sja1105: the 0x1F0000 SGMII "base address" is actually MDIO_MMD_VEND2
    https://git.kernel.org/netdev/net-next/c/4c7ee010cf75
  - [v3,net-next,4/8] net: dsa: sja1105: cache the phy-mode port property
    https://git.kernel.org/netdev/net-next/c/bf4edf4afb87
  - [v3,net-next,5/8] net: dsa: sja1105: add a PHY interface type compatibility matrix
    https://git.kernel.org/netdev/net-next/c/91a050782cbf
  - [v3,net-next,6/8] net: dsa: sja1105: add a translation table for port speeds
    https://git.kernel.org/netdev/net-next/c/41fed17fdbe5
  - [v3,net-next,7/8] net: dsa: sja1105: always keep RGMII ports in the MAC role
    https://git.kernel.org/netdev/net-next/c/f41fad3cb8b7
  - [v3,net-next,8/8] net: dsa: sja1105: some table entries are always present when read dynamically
    https://git.kernel.org/netdev/net-next/c/96c85f51f123

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html