[RFC PATCH v2 3/9] net: phy: micrel: use consistent indention after define
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2021-05-10 12:50:22
Also in:
lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
This patch changes the indention to one space between "#define" and the macro. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- drivers/net/phy/micrel.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index a14a00328fa3..227d88db7d27 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c@@ -38,15 +38,15 @@ /* general Interrupt control/status reg in vendor specific block. */ #define MII_KSZPHY_INTCS 0x1B -#define KSZPHY_INTCS_JABBER BIT(15) -#define KSZPHY_INTCS_RECEIVE_ERR BIT(14) -#define KSZPHY_INTCS_PAGE_RECEIVE BIT(13) -#define KSZPHY_INTCS_PARELLEL BIT(12) -#define KSZPHY_INTCS_LINK_PARTNER_ACK BIT(11) -#define KSZPHY_INTCS_LINK_DOWN BIT(10) -#define KSZPHY_INTCS_REMOTE_FAULT BIT(9) -#define KSZPHY_INTCS_LINK_UP BIT(8) -#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\ +#define KSZPHY_INTCS_JABBER BIT(15) +#define KSZPHY_INTCS_RECEIVE_ERR BIT(14) +#define KSZPHY_INTCS_PAGE_RECEIVE BIT(13) +#define KSZPHY_INTCS_PARELLEL BIT(12) +#define KSZPHY_INTCS_LINK_PARTNER_ACK BIT(11) +#define KSZPHY_INTCS_LINK_DOWN BIT(10) +#define KSZPHY_INTCS_REMOTE_FAULT BIT(9) +#define KSZPHY_INTCS_LINK_UP BIT(8) +#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\ KSZPHY_INTCS_LINK_DOWN) #define KSZPHY_INTCS_LINK_DOWN_STATUS BIT(2) #define KSZPHY_INTCS_LINK_UP_STATUS BIT(0)
@@ -54,11 +54,11 @@ KSZPHY_INTCS_LINK_UP_STATUS) /* PHY Control 1 */ -#define MII_KSZPHY_CTRL_1 0x1e +#define MII_KSZPHY_CTRL_1 0x1e /* PHY Control 2 / PHY Control (if no PHY Control 1) */ -#define MII_KSZPHY_CTRL_2 0x1f -#define MII_KSZPHY_CTRL MII_KSZPHY_CTRL_2 +#define MII_KSZPHY_CTRL_2 0x1f +#define MII_KSZPHY_CTRL MII_KSZPHY_CTRL_2 /* bitmap of PHY register to set interrupt mode */ #define KSZPHY_CTRL_INT_ACTIVE_HIGH BIT(9) #define KSZPHY_RMII_REF_CLK_SEL BIT(7)
--
2.29.2