Re: [RFC PATCH v1 1/9] net: phy: micrel: move phy reg offsets to common header

+#define PHY_REG_CTRL			0

MII_BMCR

+
+#define PHY_RESET			BIT(15)
+#define PHY_LOOPBACK			BIT(14)
+#define PHY_SPEED_100MBIT		BIT(13)
+#define PHY_AUTO_NEG_ENABLE		BIT(12)
+#define PHY_POWER_DOWN			BIT(11)
+#define PHY_MII_DISABLE			BIT(10)
+#define PHY_AUTO_NEG_RESTART		BIT(9)
+#define PHY_FULL_DUPLEX			BIT(8)
+#define PHY_COLLISION_TEST_NOT		BIT(7)

All the above appear to be standard BMCR bits. Please use the existing
#defines in include/uapi/linux/mii.h

+#define PHY_HP_MDIX			BIT(5)
+#define PHY_FORCE_MDIX			BIT(4)
+#define PHY_AUTO_MDIX_DISABLE		BIT(3)
+#define PHY_REMOTE_FAULT_DISABLE	BIT(2)
+#define PHY_TRANSMIT_DISABLE		BIT(1)
+#define PHY_LED_DISABLE			BIT(0)

Since you are moving into a global scope header, please add a device
prefix.

+
+#define PHY_REG_STATUS			1

MII_BMSR

+
+#define PHY_100BT4_CAPABLE		BIT(15)
+#define PHY_100BTX_FD_CAPABLE		BIT(14)
+#define PHY_100BTX_CAPABLE		BIT(13)
+#define PHY_10BT_FD_CAPABLE		BIT(12)
+#define PHY_10BT_CAPABLE		BIT(11)
+#define PHY_MII_SUPPRESS_CAPABLE_NOT	BIT(6)
+#define PHY_AUTO_NEG_ACKNOWLEDGE	BIT(5)
+#define PHY_REMOTE_FAULT		BIT(4)
+#define PHY_AUTO_NEG_CAPABLE		BIT(3)
+#define PHY_LINK_STATUS			BIT(2)
+#define PHY_JABBER_DETECT_NOT		BIT(1)
+#define PHY_EXTENDED_CAPABILITY		BIT(0)

These also look to be pretty standard BMSR defines.

+
+#define PHY_REG_ID_1			2
+#define PHY_REG_ID_2			3

MII_PHYSID1 & MII_PHYSID2

Please remove everything which directly matches the existing defines.
Just add defines for bits which don't follow 802.3 c22.

     Andrew