[RFC PATCH net-next v2 09/17] net: dsa: qca8k: add support for switch rev
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: 2021-05-02 23:10:01
Also in:
lkml
Subsystem:
networking drivers, networking [dsa], the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds
qca8k internal phy driver require some special debug value to be set based on the switch revision. Rework the switch id read function to also read the chip revision. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> --- drivers/net/dsa/qca8k.c | 46 +++++++++++++++++++++++++++-------------- drivers/net/dsa/qca8k.h | 6 ++++-- 2 files changed, 34 insertions(+), 18 deletions(-)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 3f42d731756c..5478bee39c6e 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c@@ -1578,13 +1578,39 @@ static const struct dsa_switch_ops qca8k_switch_ops = { .phylink_mac_link_up = qca8k_phylink_mac_link_up, }; +static int qca8k_read_switch_id(struct qca8k_priv *priv) +{ + const struct qca8k_match_data *data; + int ret; + u32 val; + u8 id; + + /* get the switches ID from the compatible */ + data = of_device_get_match_data(priv->dev); + if (!data) + return -ENODEV; + + ret = qca8k_read(priv, QCA8K_REG_MASK_CTRL, &val); + if (ret) + return -ENODEV; + + id = QCA8K_MASK_CTRL_DEVICE_ID(val & QCA8K_MASK_CTRL_DEVICE_ID_MASK); + if (id != data->id) { + dev_err(priv->dev, "Switch id detected %x but expected %x", id, data->id); + return -ENODEV; + } + + /* Save revision to communicate to the internal PHY driver */ + priv->switch_revision = (val & QCA8K_MASK_CTRL_REV_ID_MASK); + + return 0; +} + static int qca8k_sw_probe(struct mdio_device *mdiodev) { - const struct qca8k_match_data *data; struct qca8k_priv *priv; int ret; - u32 id; /* allocate the private data struct so that we can probe the switches * ID register
@@ -1610,23 +1636,11 @@ qca8k_sw_probe(struct mdio_device *mdiodev) gpiod_set_value_cansleep(priv->reset_gpio, 0); } - /* get the switches ID from the compatible */ - data = of_device_get_match_data(&mdiodev->dev); - if (!data) - return -ENODEV; - - /* read the switches ID register */ - ret = qca8k_read(priv, QCA8K_REG_MASK_CTRL, &id); + /* Check the detected switch id */ + ret = qca8k_read_switch_id(priv); if (ret) return ret; - id >>= QCA8K_MASK_CTRL_ID_S; - id &= QCA8K_MASK_CTRL_ID_M; - if (id != data->id) { - dev_err(&mdiodev->dev, "Switch id detected %x but expected %x", id, data->id); - return -ENODEV; - } - priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL); if (!priv->ds) return -ENOMEM;
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index 5fb68dbfa85a..0b503f78bf92 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h@@ -28,8 +28,10 @@ /* Global control registers */ #define QCA8K_REG_MASK_CTRL 0x000 -#define QCA8K_MASK_CTRL_ID_M 0xff -#define QCA8K_MASK_CTRL_ID_S 8 +#define QCA8K_MASK_CTRL_REV_ID_MASK GENMASK(7, 0) +#define QCA8K_MASK_CTRL_REV_ID(x) ((x) >> 0) +#define QCA8K_MASK_CTRL_DEVICE_ID_MASK GENMASK(15, 8) +#define QCA8K_MASK_CTRL_DEVICE_ID(x) ((x) >> 8) #define QCA8K_REG_PORT0_PAD_CTRL 0x004 #define QCA8K_REG_PORT5_PAD_CTRL 0x008 #define QCA8K_REG_PORT6_PAD_CTRL 0x00c
--
2.30.2