[PATCH net-next] net: neterion: fix doc warnings in s2io.c
From: Yang Yingliang <hidden>
Date: 2021-05-31 12:44:42
Also in:
lkml
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Add description for may_sleep to fix the W=1 warnings: drivers/net/ethernet/neterion/s2io.c:1110: warning: Function parameter or member 'may_sleep' not described in 'init_tti' drivers/net/ethernet/neterion/s2io.c:3335: warning: Function parameter or member 'may_sleep' not described in 'wait_for_cmd_complete' drivers/net/ethernet/neterion/s2io.c:4881: warning: Function parameter or member 'may_sleep' not described in 's2io_set_multicast' Signed-off-by: Yang Yingliang <redacted> --- drivers/net/ethernet/neterion/s2io.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 27a65ab3d501..0b017d4f5c08 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c@@ -1101,6 +1101,8 @@ static int s2io_print_pci_mode(struct s2io_nic *nic) * @nic: device private variable * @link: link status (UP/DOWN) used to enable/disable continuous * transmit interrupts + * @may_sleep: parameter indicates if sleeping when waiting for + * command complete * Description: The function configures transmit traffic interrupts * Return Value: SUCCESS on success and * '-1' on failure
@@ -3323,6 +3325,8 @@ static void s2io_updt_xpak_counter(struct net_device *dev) * @addr: address * @busy_bit: bit to check for busy * @bit_state: state to check + * @may_sleep: parameter indicates if sleeping when waiting for + * command complete * Description: Function that waits for a command to Write into RMAC * ADDR DATA registers to be completed and returns either success or * error depending on whether the command was complete or not.
@@ -4868,6 +4872,8 @@ static struct net_device_stats *s2io_get_stats(struct net_device *dev) /** * s2io_set_multicast - entry point for multicast address enable/disable. * @dev : pointer to the device structure + * @may_sleep: parameter indicates if sleeping when waiting for command + * complete * Description: * This function is a driver entry point which gets called by the kernel * whenever multicast addresses must be enabled/disabled. This also gets
--
2.25.1