[PATCH net-next 1/2] net: r6040: Use logical or for MDIO operations
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2021-05-23 15:54:34
Also in:
lkml
Subsystem:
networking drivers, rdc r6040 fast ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Florian Fainelli, Linus Torvalds
This is not a functional change, but we should be using a logical or to assign the bits we will be writing to the MDIO read and write registers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/ethernet/rdc/r6040.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c
index 7c74318620b1..aff68e2cb700 100644
--- a/drivers/net/ethernet/rdc/r6040.c
+++ b/drivers/net/ethernet/rdc/r6040.c@@ -200,7 +200,7 @@ static int r6040_phy_read(void __iomem *ioaddr, int phy_addr, int reg) int limit = MAC_DEF_TIMEOUT; u16 cmd; - iowrite16(MDIO_READ + reg + (phy_addr << 8), ioaddr + MMDIO); + iowrite16(MDIO_READ | reg | (phy_addr << 8), ioaddr + MMDIO); /* Wait for the read bit to be cleared */ while (limit--) { cmd = ioread16(ioaddr + MMDIO);
@@ -224,7 +224,7 @@ static int r6040_phy_write(void __iomem *ioaddr, iowrite16(val, ioaddr + MMWD); /* Write the command to the MDIO bus */ - iowrite16(MDIO_WRITE + reg + (phy_addr << 8), ioaddr + MMDIO); + iowrite16(MDIO_WRITE | reg | (phy_addr << 8), ioaddr + MMDIO); /* Wait for the write bit to be cleared */ while (limit--) { cmd = ioread16(ioaddr + MMDIO);
--
2.25.1