[PATCH net] net: dsa: bcm_sf2: Fix bcm_sf2_reg_rgmii_cntrl() call for non-RGMII port
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2021-05-21 17:46:24
Also in:
lkml
Subsystem:
broadcom b53/sf2 ethernet switch driver, networking drivers, networking [dsa], the rest · Maintainers:
Florian Fainelli, Jonas Gorski, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds
We cannot call bcm_sf2_reg_rgmii_cntrl() for a port that is not RGMII,
yet we do that in bcm_sf2_sw_mac_link_up() irrespective of the port's
interface. Move that read until we have properly qualified the PHY
interface mode. This avoids triggering a warning on 7278 platforms that
have GMII ports.
Fixes: 55cfeb396965 ("net: dsa: bcm_sf2: add function finding RGMII register")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
David, Jakub, please queue this up for stable because the offnending
commit is already in 5.12, thanks!
drivers/net/dsa/bcm_sf2.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 9150038b60cb..3b018fcf4412 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c@@ -821,11 +821,9 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port, bcm_sf2_sw_mac_link_set(ds, port, interface, true); if (port != core_readl(priv, CORE_IMP0_PRT_ID)) { - u32 reg_rgmii_ctrl; + u32 reg_rgmii_ctrl = 0; u32 reg, offset; - reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port); - if (priv->type == BCM4908_DEVICE_ID || priv->type == BCM7445_DEVICE_ID) offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
@@ -836,6 +834,7 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port, interface == PHY_INTERFACE_MODE_RGMII_TXID || interface == PHY_INTERFACE_MODE_MII || interface == PHY_INTERFACE_MODE_REVMII) { + reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port); reg = reg_readl(priv, reg_rgmii_ctrl); reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
--
2.25.1