Thread (7 messages) flat view 7 messages, 2 authors, 2021-05-18
STALE1918d

Revision v1 of 5 in this series.

Revisions (5)
  1. v1 current
  2. v1 [diff vs current]
  3. v1 [diff vs current]
  4. v1 [diff vs current]
  5. v1 [diff vs current]

[PATCH net-next 2/5] net: wan: add some required spaces

From: Guangbin Huang <hidden>
Date: 2021-05-18 12:33:31
Also in: lkml
Subsystem: generic hdlc (wan) drivers, networking drivers, the rest · Maintainers: Krzysztof Halasa, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

From: Peng Li <redacted>

Add space required before the open parenthesis '(',
and add spaces required around that '<', '>' and '!='.

Signed-off-by: Peng Li <redacted>
Signed-off-by: Guangbin Huang <redacted>
---
 drivers/net/wan/c101.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c
index 215f2fbfc3ae..5a04f18db32a 100644
--- a/drivers/net/wan/c101.c
+++ b/drivers/net/wan/c101.c
@@ -70,7 +70,7 @@ typedef struct card_s {
 	u8 page;
 
 	struct card_s *next_card;
-}card_t;
+} card_t;
 
 typedef card_t port_t;
 
@@ -85,7 +85,7 @@ static card_t **new_card = &first_card;
 #define sca_outw(value, reg, card) do { \
 	writeb(value & 0xFF, (card)->win0base + C101_SCA + (reg)); \
 	writeb((value >> 8 ) & 0xFF, (card)->win0base + C101_SCA + (reg + 1));\
-} while(0)
+} while (0)
 
 #define port_to_card(port)	   (port)
 #define log_node(port)		   (0)
@@ -143,7 +143,7 @@ static void c101_set_iface(port_t *port)
 	u8 rxs = port->rxs & CLK_BRG_MASK;
 	u8 txs = port->txs & CLK_BRG_MASK;
 
-	switch(port->settings.clock_type) {
+	switch (port->settings.clock_type) {
 	case CLOCK_INT:
 		rxs |= CLK_BRG_RX; /* TX clock */
 		txs |= CLK_RXCLK_TX; /* BRG output */
@@ -229,7 +229,7 @@ static int c101_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	if (cmd != SIOCWANDEV)
 		return hdlc_ioctl(dev, ifr, cmd);
 
-	switch(ifr->ifr_settings.type) {
+	switch (ifr->ifr_settings.type) {
 	case IF_GET_IFACE:
 		ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
 		if (ifr->ifr_settings.size < size) {
@@ -241,7 +241,7 @@ static int c101_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 		return 0;
 
 	case IF_IFACE_SYNC_SERIAL:
-		if(!capable(CAP_NET_ADMIN))
+		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
 		if (copy_from_user(&new_line, line, size))
@@ -296,12 +296,12 @@ static int __init c101_run(unsigned long irq, unsigned long winbase)
 	card_t *card;
 	int result;
 
-	if (irq<3 || irq>15 || irq == 6) /* FIXME */ {
+	if (irq < 3 || irq > 15 || irq == 6) /* FIXME */ {
 		pr_err("invalid IRQ value\n");
 		return -ENODEV;
 	}
 
-	if (winbase < 0xC0000 || winbase > 0xDFFFF || (winbase & 0x3FFF) !=0) {
+	if (winbase < 0xC0000 || winbase > 0xDFFFF || (winbase & 0x3FFF) != 0) {
 		pr_err("invalid RAM value\n");
 		return -ENODEV;
 	}
@@ -404,7 +404,7 @@ static int __init c101_init(void)
 
 		if (*hw == '\x0')
 			return first_card ? 0 : -EINVAL;
-	}while(*hw++ == ':');
+	} while (*hw++ == ':');
 
 	pr_err("invalid hardware parameters\n");
 	return first_card ? 0 : -EINVAL;
-- 
2.8.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help