[PATCH v2 26/40] docs: networking: device_drivers: Use ASCII subset instead of UTF-8 alternate symbols
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Date: 2021-05-12 12:54:11
Also in:
intel-wired-lan, linux-doc, lkml
Subsystem:
documentation, intel ethernet drivers, networking [general], the rest · Maintainers:
Jonathan Corbet, Tony Nguyen, Przemek Kitszel, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The conversion tools used during DocBook/LaTeX/Markdown->ReST conversion and some automatic rules which exists on certain text editors like LibreOffice turned ASCII characters into some UTF-8 alternatives that are better displayed on html and PDF. While it is OK to use UTF-8 characters in Linux, it is better to use the ASCII subset instead of using an UTF-8 equivalent character as it makes life easier for tools like grep, and are easier to edit with the some commonly used text/source code editors. Also, Sphinx already do such conversion automatically outside literal blocks: https://docutils.sourceforge.io/docs/user/smartquotes.html So, replace the occurences of the following UTF-8 characters: - U+00a0 (' '): NO-BREAK SPACE - U+2018 ('‘'): LEFT SINGLE QUOTATION MARK - U+2019 ('’'): RIGHT SINGLE QUOTATION MARK Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- .../device_drivers/ethernet/intel/i40e.rst | 8 ++++---- .../device_drivers/ethernet/intel/iavf.rst | 4 ++-- .../device_drivers/ethernet/netronome/nfp.rst | 12 ++++++------ 3 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/Documentation/networking/device_drivers/ethernet/intel/i40e.rst b/Documentation/networking/device_drivers/ethernet/intel/i40e.rst
index 2d3f6bd969a2..d0e9b783a224 100644
--- a/Documentation/networking/device_drivers/ethernet/intel/i40e.rst
+++ b/Documentation/networking/device_drivers/ethernet/intel/i40e.rst@@ -466,7 +466,7 @@ network. PTP support varies among Intel devices that support this driver. Use "ethtool -T <netdev name>" to get a definitive list of PTP capabilities supported by the device. -IEEE 802.1ad (QinQ) Support +IEEE 802.1ad (QinQ) Support --------------------------- The IEEE 802.1ad standard, informally known as QinQ, allows for multiple VLAN IDs within a single Ethernet frame. VLAN IDs are sometimes referred to as
@@ -523,8 +523,8 @@ of a port's bandwidth (should it be available). The sum of all the values for Maximum Bandwidth is not restricted, because no more than 100% of a port's bandwidth can ever be used. -NOTE: X710/XXV710 devices fail to enable Max VFs (64) when Multiple Functions -per Port (MFP) and SR-IOV are enabled. An error from i40e is logged that says +NOTE: X710/XXV710 devices fail to enable Max VFs (64) when Multiple Functions +per Port (MFP) and SR-IOV are enabled. An error from i40e is logged that says "add vsi failed for VF N, aq_err 16". To workaround the issue, enable less than 64 virtual functions (VFs).
@@ -680,7 +680,7 @@ queues: for each tc, <num queues>@<offset> (e.g. queues 16@0 16@16 assigns 16 queues to tc0 at offset 0 and 16 queues to tc1 at offset 16. Max total number of queues for all tcs is 64 or number of cores, whichever is lower.) -hw 1 mode channel: ‘channel’ with ‘hw’ set to 1 is a new new hardware +hw 1 mode channel: 'channel' with 'hw' set to 1 is a new new hardware offload mode in mqprio that makes full use of the mqprio options, the TCs, the queue configurations, and the QoS parameters.
diff --git a/Documentation/networking/device_drivers/ethernet/intel/iavf.rst b/Documentation/networking/device_drivers/ethernet/intel/iavf.rst
index 25330b7b5168..b70eea67c3d9 100644
--- a/Documentation/networking/device_drivers/ethernet/intel/iavf.rst
+++ b/Documentation/networking/device_drivers/ethernet/intel/iavf.rst@@ -113,7 +113,7 @@ which the AVF is associated. The following are base mode features: - AVF device ID - HW mailbox is used for VF to PF communications (including on Windows) -IEEE 802.1ad (QinQ) Support +IEEE 802.1ad (QinQ) Support --------------------------- The IEEE 802.1ad standard, informally known as QinQ, allows for multiple VLAN IDs within a single Ethernet frame. VLAN IDs are sometimes referred to as
@@ -171,7 +171,7 @@ queues: for each tc, <num queues>@<offset> (e.g. queues 16@0 16@16 assigns 16 queues to tc0 at offset 0 and 16 queues to tc1 at offset 16. Max total number of queues for all tcs is 64 or number of cores, whichever is lower.) -hw 1 mode channel: ‘channel’ with ‘hw’ set to 1 is a new new hardware +hw 1 mode channel: 'channel' with 'hw' set to 1 is a new new hardware offload mode in mqprio that makes full use of the mqprio options, the TCs, the queue configurations, and the QoS parameters.
diff --git a/Documentation/networking/device_drivers/ethernet/netronome/nfp.rst b/Documentation/networking/device_drivers/ethernet/netronome/nfp.rst
index ada611fb427c..949c036e8667 100644
--- a/Documentation/networking/device_drivers/ethernet/netronome/nfp.rst
+++ b/Documentation/networking/device_drivers/ethernet/netronome/nfp.rst@@ -62,14 +62,14 @@ actual firmware files in application-named subdirectories in $ tree /lib/firmware/netronome/ /lib/firmware/netronome/ ├── bpf - │ ├── nic_AMDA0081-0001_1x40.nffw - │ └── nic_AMDA0081-0001_4x10.nffw + │ ├── nic_AMDA0081-0001_1x40.nffw + │ └── nic_AMDA0081-0001_4x10.nffw ├── flower - │ ├── nic_AMDA0081-0001_1x40.nffw - │ └── nic_AMDA0081-0001_4x10.nffw + │ ├── nic_AMDA0081-0001_1x40.nffw + │ └── nic_AMDA0081-0001_4x10.nffw ├── nic - │ ├── nic_AMDA0081-0001_1x40.nffw - │ └── nic_AMDA0081-0001_4x10.nffw + │ ├── nic_AMDA0081-0001_1x40.nffw + │ └── nic_AMDA0081-0001_4x10.nffw ├── nic_AMDA0081-0001_1x40.nffw -> bpf/nic_AMDA0081-0001_1x40.nffw └── nic_AMDA0081-0001_4x10.nffw -> bpf/nic_AMDA0081-0001_4x10.nffw
--
2.30.2