[PATCH net-next v3 3/5] net: pch_gbe: use readx_poll_timeout_atomic() variant
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: 2021-05-10 16:39:41
Also in:
lkml
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Use readx_poll_timeout_atomic() instead of open coded variants. While at it, add __iomem attribute to the parameter of pch_gbe_wait_clr_bit(). This in particular will fix a lot of warnings detected by Sparse, e.g. .../pch_gbe_main.c:308:26: warning: incorrect type in argument 1 (different address spaces) .../pch_gbe_main.c:308:26: expected void const [noderef] __iomem * .../pch_gbe_main.c:308:26: got void *reg Reported-by: kernel test robot <redacted> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Flavio Suligoi <f.suligoi@asem.it> --- .../ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 27 ++++++------------- 1 file changed, 8 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 8adc8cfaca03..7b224745bf3e 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c@@ -11,6 +11,7 @@ #include <linux/gpio/consumer.h> #include <linux/gpio/machine.h> +#include <linux/iopoll.h> #include <linux/module.h> #include <linux/net_tstamp.h> #include <linux/ptp_classify.h>
@@ -299,15 +300,12 @@ static s32 pch_gbe_mac_read_mac_addr(struct pch_gbe_hw *hw) * @reg: Pointer of register * @bit: Busy bit */ -static void pch_gbe_wait_clr_bit(void *reg, u32 bit) +static void pch_gbe_wait_clr_bit(void __iomem *reg, u32 bit) { u32 tmp; /* wait busy */ - tmp = 1000; - while ((ioread32(reg) & bit) && --tmp) - cpu_relax(); - if (!tmp) + if (readx_poll_timeout_atomic(ioread32, reg, tmp, !(tmp & bit), 0, 10)) pr_err("Error: busy bit is not cleared\n"); }
@@ -491,18 +489,13 @@ u16 pch_gbe_mac_ctrl_miim(struct pch_gbe_hw *hw, u32 addr, u32 dir, u32 reg, u16 data) { struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw); - u32 data_out = 0; - unsigned int i; unsigned long flags; + u32 data_out; spin_lock_irqsave(&hw->miim_lock, flags); - for (i = 100; i; --i) { - if ((ioread32(&hw->reg->MIIM) & PCH_GBE_MIIM_OPER_READY)) - break; - udelay(20); - } - if (i == 0) { + if (readx_poll_timeout_atomic(ioread32, &hw->reg->MIIM, data_out, + data_out & PCH_GBE_MIIM_OPER_READY, 20, 2000)) { netdev_err(adapter->netdev, "pch-gbe.miim won't go Ready\n"); spin_unlock_irqrestore(&hw->miim_lock, flags); return 0; /* No way to indicate timeout error */
@@ -510,12 +503,8 @@ u16 pch_gbe_mac_ctrl_miim(struct pch_gbe_hw *hw, u32 addr, u32 dir, u32 reg, iowrite32(((reg << PCH_GBE_MIIM_REG_ADDR_SHIFT) | (addr << PCH_GBE_MIIM_PHY_ADDR_SHIFT) | dir | data), &hw->reg->MIIM); - for (i = 0; i < 100; i++) { - udelay(20); - data_out = ioread32(&hw->reg->MIIM); - if ((data_out & PCH_GBE_MIIM_OPER_READY)) - break; - } + readx_poll_timeout_atomic(ioread32, &hw->reg->MIIM, data_out, + data_out & PCH_GBE_MIIM_OPER_READY, 20, 2000); spin_unlock_irqrestore(&hw->miim_lock, flags); netdev_dbg(adapter->netdev, "PHY %s: reg=%d, data=0x%04X\n",
--
2.30.2