[PATCH v2 3/7] net: phy: at803x: AR8085 & AR9331: add loopback support
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2021-04-15 13:08:03
Also in:
linux-arm-kernel, lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
PHY loopback is needed for the ethernet controller self test support. This PHY was tested with the generic net sefltest in combination with FEC ethernet controller and AR9331 switch. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- drivers/net/phy/at803x.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index d7799beb811c..f74f427a8da5 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c@@ -1128,6 +1128,7 @@ static struct phy_driver at803x_driver[] = { .get_wol = at803x_get_wol, .suspend = at803x_suspend, .resume = at803x_resume, + .set_loopback = genphy_loopback, /* PHY_GBIT_FEATURES */ .read_status = at803x_read_status, .config_intr = at803x_config_intr,
@@ -1207,6 +1208,7 @@ static struct phy_driver at803x_driver[] = { .read_status = at803x_read_status, .soft_reset = genphy_soft_reset, .config_aneg = at803x_config_aneg, + .set_loopback = genphy_loopback, } }; module_phy_driver(at803x_driver);
--
2.29.2