[PATCH stable 4.14] net: phy: broadcom: Only advertise EEE for supported modes
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2021-04-12 23:31:08
Also in:
lkml, stable
Subsystem:
broadcom ethernet phy drivers, ethernet phy library, networking drivers, the rest · Maintainers:
Florian Fainelli, Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
commit c056d480b40a68f2520ccc156c7fae672d69d57d upstream
We should not be advertising EEE for modes that we do not support,
correct that oversight by looking at the PHY device supported linkmodes.
Fixes: 99cec8a4dda2 ("net: phy: broadcom: Allow enabling or disabling of EEE")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/phy/bcm-phy-lib.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index d5e0833d69b9..66e4ef8ed345 100644
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c@@ -198,7 +198,7 @@ EXPORT_SYMBOL_GPL(bcm_phy_enable_apd); int bcm_phy_set_eee(struct phy_device *phydev, bool enable) { - int val; + int val, mask = 0; /* Enable EEE at PHY level */ val = phy_read_mmd(phydev, MDIO_MMD_AN, BRCM_CL45VEN_EEE_CONTROL);
@@ -217,10 +217,15 @@ int bcm_phy_set_eee(struct phy_device *phydev, bool enable) if (val < 0) return val; + if (phydev->supported & SUPPORTED_1000baseT_Full) + mask |= MDIO_EEE_1000T; + if (phydev->supported & SUPPORTED_100baseT_Full) + mask |= MDIO_EEE_100TX; + if (enable) - val |= (MDIO_EEE_100TX | MDIO_EEE_1000T); + val |= mask; else - val &= ~(MDIO_EEE_100TX | MDIO_EEE_1000T); + val &= ~mask; phy_write_mmd(phydev, MDIO_MMD_AN, BCM_CL45VEN_EEE_ADV, (u32)val);
--
2.25.1