Thread (18 messages) 18 messages, 3 authors, 2021-04-14

Re: [PATCH 1/4] dt-bindings: phy: Add binding for TI TCAN104x CAN transceivers

From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: 2021-04-12 10:20:03
Also in: linux-can, linux-devicetree, linux-phy, lkml

On 4/9/21 3:40 PM, Aswath Govindraju wrote:
quoted hunk ↗ jump to hunk
Add binding documentation for TI TCAN104x CAN transceivers.

Signed-off-by: Aswath Govindraju <redacted>
---
 .../bindings/phy/ti,tcan104x-can.yaml         | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
new file mode 100644
index 000000000000..4abfc30a97d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/ti,tcan104x-can.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TCAN104x CAN TRANSCEIVER PHY
+
+maintainers:
+  - Aswath Govindraju <a-govindraju@ti.com>
+
+properties:
+  $nodename:
+    pattern: "^tcan104x-phy"
+
+  compatible:
+    enum:
+      - ti,tcan1042
+      - ti,tcan1043
Can you create a generic standby only and a generic standby and enable transceiver?
+
+  '#phy-cells':
+    const: 0
+
+  standby-gpios:
+    description:
+      gpio node to toggle standby signal on transceiver
+    maxItems: 1
+
+  enable-gpios:
+    description:
+      gpio node to toggle enable signal on transceiver
+    maxItems: 1
+
+  max-bitrate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      max bit rate supported in bps
+    minimum: 1
+
+required:
+  - compatible
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    transceiver1: tcan104x-phy {
+      compatible = "ti,tcan1043";
+      #phy-cells = <0>;
+      max-bitrate = <5000000>;
+      standby-gpios = <&wakeup_gpio1 16 GPIO_ACTIVE_LOW>;
+      enable-gpios = <&main_gpio1 67 GPIO_ACTIVE_LOW>;
+    };

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

Attachments

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help