[PATCH net-next 4/5] net: dsa: mv88e6xxx: simulate Amethyst PHY model number
From: Marek Behún <kabel@kernel.org>
Date: 2021-04-13 07:56:41
Subsystem:
marvell 88e6xxx ethernet switch fabric driver, networking drivers, networking [dsa], the rest · Maintainers:
Andrew Lunn, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Linus Torvalds
Amethyst internal PHYs also report empty model number in MII_PHYSID2. Fill in switch product number, as is done for Topaz and Peridot. Signed-off-by: Marek Behún <kabel@kernel.org> --- drivers/net/dsa/mv88e6xxx/chip.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 860dca41cf4b..9c4f8517c34b 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c@@ -3165,6 +3165,7 @@ static int mv88e6xxx_setup(struct dsa_switch *ds) static const u16 family_prod_id_table[] = { [MV88E6XXX_FAMILY_6341] = MV88E6XXX_PORT_SWITCH_ID_PROD_6341, [MV88E6XXX_FAMILY_6390] = MV88E6XXX_PORT_SWITCH_ID_PROD_6390, + [MV88E6XXX_FAMILY_6393] = MV88E6XXX_PORT_SWITCH_ID_PROD_6393X, }; static int mv88e6xxx_mdio_read(struct mii_bus *bus, int phy, int reg)
--
2.26.3