[PATCH net-next v4 05/16] net: phy: marvell10g: add all MACTYPE definitions for 88X33x0
From: Marek Behún <kabel@kernel.org>
Date: 2021-04-07 20:25:14
Subsystem:
ethernet phy library, marvell mv88x3310 phy driver, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Russell King, Marek Behún, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Add all MACTYPE definitions for 88X3310, 88X3310P, 88X3340 and 88X3340P. In order to have consistent naming, rename MV_V2_33X0_PORT_CTRL_MACTYPE_RATE_MATCH to MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> --- drivers/net/phy/marvell10g.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 7552a658a513..7d9a45437b69 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c@@ -78,10 +78,18 @@ enum { /* Vendor2 MMD registers */ MV_V2_PORT_CTRL = 0xf001, - MV_V2_PORT_CTRL_PWRDOWN = BIT(11), - MV_V2_33X0_PORT_CTRL_SWRST = BIT(15), - MV_V2_33X0_PORT_CTRL_MACTYPE_MASK = 0x7, - MV_V2_33X0_PORT_CTRL_MACTYPE_RATE_MATCH = 0x6, + MV_V2_PORT_CTRL_PWRDOWN = BIT(11), + MV_V2_33X0_PORT_CTRL_SWRST = BIT(15), + MV_V2_33X0_PORT_CTRL_MACTYPE_MASK = 0x7, + MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI = 0x0, + MV_V2_3310_PORT_CTRL_MACTYPE_XAUI_RATE_MATCH = 0x1, + MV_V2_3340_PORT_CTRL_MACTYPE_RXAUI_NO_SGMII_AN = 0x1, + MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH = 0x2, + MV_V2_3310_PORT_CTRL_MACTYPE_XAUI = 0x3, + MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER = 0x4, + MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_NO_SGMII_AN = 0x5, + MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH = 0x6, + MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII = 0x7, /* Temperature control/read registers (88X3310 only) */ MV_V2_TEMP_CTRL = 0xf08a, MV_V2_TEMP_CTRL_MASK = 0xc000,
@@ -480,7 +488,7 @@ static int mv3310_config_init(struct phy_device *phydev) if (val < 0) return val; priv->rate_match = ((val & MV_V2_33X0_PORT_CTRL_MACTYPE_MASK) == - MV_V2_33X0_PORT_CTRL_MACTYPE_RATE_MATCH); + MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH); /* Enable EDPD mode - saving 600mW */ return mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
--
2.26.2