[PATCH net-next v2 2/6] net: stmmac: make SPH enable/disable to be configurable
flat view
STALE2024d
SUPERSEDED
From: Ong Boon Leong <hidden>
Date: 2021-03-30 02:46:50
Also in:
bpf, linux-arm-kernel, lkml
Subsystem:
networking drivers, stmmac ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Maxime Chevallier, Linus Torvalds
Revision v2 of 4 in this series.
Revisions (4)
- v1 [diff vs current]
- v2 current
- v3 [diff vs current]
- v4 [diff vs current]
SPH functionality splits header and payload according to split mode and offsef fields (SPLM and SPLOFST). It is beneficials for Linux network stack RX processing however it adds a lot of complexity in XDP processing. So, this patch makes the split-header (SPH) capability of the controller is stored in "priv->sph_cap" and the enabling/disabling of SPH is decided by "priv->sph". This is to prepare initial XDP enabling for stmmac to disable the use of SPH whenever XDP is enabled. Signed-off-by: Ong Boon Leong <redacted> --- drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 + drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 +++++++----- 2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 9966f6f10905..e293423f98c3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h@@ -160,6 +160,7 @@ struct stmmac_priv { bool tx_path_in_lpi_mode; bool tso; int sph; + int sph_cap; u32 sarc_type; unsigned int dma_buf_sz;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 9d63e8c365ae..18e34a1e2367 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c@@ -2858,6 +2858,7 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp) struct stmmac_priv *priv = netdev_priv(dev); u32 rx_cnt = priv->plat->rx_queues_to_use; u32 tx_cnt = priv->plat->tx_queues_to_use; + bool sph_en; u32 chan; int ret;
@@ -2952,10 +2953,10 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp) } /* Enable Split Header */ - if (priv->sph && priv->hw->rx_csum) { - for (chan = 0; chan < rx_cnt; chan++) - stmmac_enable_sph(priv, priv->ioaddr, 1, chan); - } + sph_en = (priv->hw->rx_csum > 0) && priv->sph; + for (chan = 0; chan < rx_cnt; chan++) + stmmac_enable_sph(priv, priv->ioaddr, sph_en, chan); + /* VLAN Tag Insertion */ if (priv->dma_cap.vlins)
@@ -5708,7 +5709,8 @@ int stmmac_dvr_probe(struct device *device, if (priv->dma_cap.sphen) { ndev->hw_features |= NETIF_F_GRO; - priv->sph = true; + priv->sph_cap = true; + priv->sph = priv->sph_cap; dev_info(priv->device, "SPH feature enabled\n"); }
--
2.25.1