Thread (4 messages) flat view 4 messages, 3 authors, 2021-03-26

Re: [PATCH net] net: dsa: lantiq_gswip: Let GSWIP automatically set the xMII clock

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2021-03-25 18:09:51
Also in: lkml


On 3/24/2021 12:36 PM, Martin Blumenstingl wrote:
The xMII interface clock depends on the PHY interface (MII, RMII, RGMII)
as well as the current link speed. Explicitly configure the GSWIP to
automatically select the appropriate xMII interface clock.

This fixes an issue seen by some users where ports using an external
RMII or RGMII PHY were deaf (no RX or TX traffic could be seen). Most
likely this is due to an "invalid" xMII clock being selected either by
the bootloader or hardware-defaults.

Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
It would be great to have this fix backported to Linux 5.4 and 5.10 to
get rid of one more blocker which prevents OpenWrt from switching to
this new in-tree driver.
Given there is a Fixes: tag this should land at some point in the stable
tree auto-selection. Stable fixes for networking patches follows a
slightly different path:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/networking/netdev-FAQ.rst#n145
quoted hunk ↗ jump to hunk

 drivers/net/dsa/lantiq_gswip.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 52e865a3912c..809dfa3be6bb 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -799,10 +799,15 @@ static int gswip_setup(struct dsa_switch *ds)
 	/* Configure the MDIO Clock 2.5 MHz */
 	gswip_mdio_mask(priv, 0xff, 0x09, GSWIP_MDIO_MDC_CFG1);
 
-	/* Disable the xMII link */
-	for (i = 0; i < priv->hw_info->max_ports; i++)
+	for (i = 0; i < priv->hw_info->max_ports; i++) {
+		/* Disable the xMII link */
 		gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, i);
 
+		/* Automatically select the xMII interface clock */
+		gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK,
+				   GSWIP_MII_CFG_RATE_AUTO, i);
+	}
+
 	/* enable special tag insertion on cpu port */
 	gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_STEN,
 			  GSWIP_FDMA_PCTRLp(cpu_port));
-- 
Florian
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help