[PATCH v2 net-next 2/5] net: stmmac: make stmmac_interrupt() function more friendly to MSI
From: Voon Weifeng <hidden>
Date: 2021-03-25 17:40:16
Also in:
linux-arm-kernel, lkml
Subsystem:
networking drivers, stmmac ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Maxime Chevallier, Linus Torvalds
From: Ong Boon Leong <redacted> Refactor stmmac_interrupt() by introducing stmmac_common_interrupt() so that we prepare the ISR operation to be friendly to MSI later. Signed-off-by: Ong Boon Leong <redacted> Signed-off-by: Voon Weifeng <redacted> --- Changes: v1 -> v2 -Remove defensive check for invalid dev pointer --- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 54 +++++++++++-------- 1 file changed, 31 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 7c352d017eb2..abe990b9b07b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c@@ -4382,21 +4382,8 @@ static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status) } } -/** - * stmmac_interrupt - main ISR - * @irq: interrupt number. - * @dev_id: to pass the net device pointer (must be valid). - * Description: this is the main driver interrupt service routine. - * It can call: - * o DMA service routine (to manage incoming frame reception and transmission - * status) - * o Core interrupts to manage: remote wake-up, management counter, LPI - * interrupts. - */ -static irqreturn_t stmmac_interrupt(int irq, void *dev_id) +static void stmmac_common_interrupt(struct stmmac_priv *priv) { - struct net_device *dev = (struct net_device *)dev_id; - struct stmmac_priv *priv = netdev_priv(dev); u32 rx_cnt = priv->plat->rx_queues_to_use; u32 tx_cnt = priv->plat->tx_queues_to_use; u32 queues_count;
@@ -4409,13 +4396,6 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id) if (priv->irq_wake) pm_wakeup_event(priv->device, 0); - /* Check if adapter is up */ - if (test_bit(STMMAC_DOWN, &priv->state)) - return IRQ_HANDLED; - /* Check if a fatal error happened */ - if (stmmac_safety_feat_interrupt(priv)) - return IRQ_HANDLED; - if (priv->dma_cap.estsel) stmmac_est_irq_status(priv, priv->ioaddr, priv->dev, &priv->xstats, tx_cnt);
@@ -4457,11 +4437,39 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id) /* PCS link status */ if (priv->hw->pcs) { if (priv->xstats.pcs_link) - netif_carrier_on(dev); + netif_carrier_on(priv->dev); else - netif_carrier_off(dev); + netif_carrier_off(priv->dev); } } +} + +/** + * stmmac_interrupt - main ISR + * @irq: interrupt number. + * @dev_id: to pass the net device pointer. + * Description: this is the main driver interrupt service routine. + * It can call: + * o DMA service routine (to manage incoming frame reception and transmission + * status) + * o Core interrupts to manage: remote wake-up, management counter, LPI + * interrupts. + */ +static irqreturn_t stmmac_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct stmmac_priv *priv = netdev_priv(dev); + + /* Check if adapter is up */ + if (test_bit(STMMAC_DOWN, &priv->state)) + return IRQ_HANDLED; + + /* Check if a fatal error happened */ + if (stmmac_safety_feat_interrupt(priv)) + return IRQ_HANDLED; + + /* To handle Common interrupts */ + stmmac_common_interrupt(priv); /* To handle DMA interrupts */ stmmac_dma_interrupt(priv);
--
2.17.1