Thread (6 messages) 6 messages, 3 authors, 2021-03-05

Re: [PATCH] can: c_can: move runtime PM enable/disable to c_can_platform

From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: 2021-03-02 05:07:06
Also in: linux-can, lkml

On 28.02.2021 23:15:48, Tong Zhang wrote:
Currently doing modprobe c_can_pci will make kernel complain
"Unbalanced pm_runtime_enable!", this is caused by pm_runtime_enable()
called before pm is initialized in register_candev() and doing so will
I don't see where register_candev() is doing any pm related
initialization.
also cause it to enable twice.
This fix is similar to 227619c3ff7c, move those pm_enable/disable code to
c_can_platform.
As I understand 227619c3ff7c ("can: m_can: move runtime PM
enable/disable to m_can_platform"), PCI devices automatically enable PM,
when the "PCI device is added".

Please clarify the above point, otherwise the code looks OK, small
nitpick inline:
quoted hunk ↗ jump to hunk
Signed-off-by: Tong Zhang <redacted>
---
 drivers/net/can/c_can/c_can.c          | 26 ++------------------------
 drivers/net/can/c_can/c_can_platform.c |  6 +++++-
 2 files changed, 7 insertions(+), 25 deletions(-)
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index ef474bae47a1..04f783b3d9d3 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -212,18 +212,6 @@ static const struct can_bittiming_const c_can_bittiming_const = {
 	.brp_inc = 1,
 };
 
-static inline void c_can_pm_runtime_enable(const struct c_can_priv *priv)
-{
-	if (priv->device)
-		pm_runtime_enable(priv->device);
-}
-
-static inline void c_can_pm_runtime_disable(const struct c_can_priv *priv)
-{
-	if (priv->device)
-		pm_runtime_disable(priv->device);
-}
-
 static inline void c_can_pm_runtime_get_sync(const struct c_can_priv *priv)
 {
 	if (priv->device)
@@ -1335,7 +1323,6 @@ static const struct net_device_ops c_can_netdev_ops = {
 
 int register_c_can_dev(struct net_device *dev)
 {
-	struct c_can_priv *priv = netdev_priv(dev);
 	int err;
 
 	/* Deactivate pins to prevent DRA7 DCAN IP from being
@@ -1345,28 +1332,19 @@ int register_c_can_dev(struct net_device *dev)
 	 */
 	pinctrl_pm_select_sleep_state(dev->dev.parent);
 
-	c_can_pm_runtime_enable(priv);
-
 	dev->flags |= IFF_ECHO;	/* we support local echo */
 	dev->netdev_ops = &c_can_netdev_ops;
 
 	err = register_candev(dev);
-	if (err)
-		c_can_pm_runtime_disable(priv);
-	else
-		devm_can_led_init(dev);
-
+	if (!err)
+	  devm_can_led_init(dev);
Please indent with two tabs here.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

Attachments

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help