[net 3/9] net/mlx5e: Fix ethtool indication of connector type
flat view
From: Saeed Mahameed <saeed@kernel.org>
Date: 2021-03-31 21:02:19
Subsystem:
mellanox ethernet driver (mlx5e), mellanox mlx5 core vpi driver, networking drivers, the rest · Maintainers:
Saeed Mahameed, Tariq Toukan, Mark Bloch, Leon Romanovsky, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Aya Levin <redacted>
Use connector_type read from PTYS register when it's valid, based on
corresponding capability bit.
Fixes: 5b4793f81745 ("net/mlx5e: Add support for reading connector type from PTYS")
Signed-off-by: Aya Levin <redacted>
Reviewed-by: Eran Ben Elisha <redacted>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
.../ethernet/mellanox/mlx5/core/en_ethtool.c | 22 +++++++++----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index f5f2a8fd0046..53802e18af90 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c@@ -758,11 +758,11 @@ static int get_fec_supported_advertised(struct mlx5_core_dev *dev, return 0; } -static void ptys2ethtool_supported_advertised_port(struct ethtool_link_ksettings *link_ksettings, - u32 eth_proto_cap, - u8 connector_type, bool ext) +static void ptys2ethtool_supported_advertised_port(struct mlx5_core_dev *mdev, + struct ethtool_link_ksettings *link_ksettings, + u32 eth_proto_cap, u8 connector_type) { - if ((!connector_type && !ext) || connector_type >= MLX5E_CONNECTOR_TYPE_NUMBER) { + if (!MLX5_CAP_PCAM_FEATURE(mdev, ptys_connector_type)) { if (eth_proto_cap & (MLX5E_PROT_MASK(MLX5E_10GBASE_CR) | MLX5E_PROT_MASK(MLX5E_10GBASE_SR) | MLX5E_PROT_MASK(MLX5E_40GBASE_CR4)
@@ -898,9 +898,9 @@ static int ptys2connector_type[MLX5E_CONNECTOR_TYPE_NUMBER] = { [MLX5E_PORT_OTHER] = PORT_OTHER, }; -static u8 get_connector_port(u32 eth_proto, u8 connector_type, bool ext) +static u8 get_connector_port(struct mlx5_core_dev *mdev, u32 eth_proto, u8 connector_type) { - if ((connector_type || ext) && connector_type < MLX5E_CONNECTOR_TYPE_NUMBER) + if (MLX5_CAP_PCAM_FEATURE(mdev, ptys_connector_type)) return ptys2connector_type[connector_type]; if (eth_proto &
@@ -1001,11 +1001,11 @@ int mlx5e_ethtool_get_link_ksettings(struct mlx5e_priv *priv, data_rate_oper, link_ksettings); eth_proto_oper = eth_proto_oper ? eth_proto_oper : eth_proto_cap; - - link_ksettings->base.port = get_connector_port(eth_proto_oper, - connector_type, ext); - ptys2ethtool_supported_advertised_port(link_ksettings, eth_proto_admin, - connector_type, ext); + connector_type = connector_type < MLX5E_CONNECTOR_TYPE_NUMBER ? + connector_type : MLX5E_PORT_UNKNOWN; + link_ksettings->base.port = get_connector_port(mdev, eth_proto_oper, connector_type); + ptys2ethtool_supported_advertised_port(mdev, link_ksettings, eth_proto_admin, + connector_type); get_lp_advertising(mdev, eth_proto_lp, link_ksettings); if (an_status == MLX5_AN_COMPLETE)
--
2.30.2