[PATCH net-next] docs: nf_flowtable: fix compilation and warnings
From: Pablo Neira Ayuso <pablo@netfilter.org>
Date: 2021-03-25 21:11:35
Also in:
netfilter-devel
Subsystem:
documentation, networking [general], the rest · Maintainers:
Jonathan Corbet, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
... cannot be used in block quote, it breaks compilation, remove it.
Fix warnings due to missing blank line such as:
net-next/Documentation/networking/nf_flowtable.rst:142: WARNING: Block quote ends without a blank line; unexpected unindent.
Fixes: 143490cde566 ("docs: nf_flowtable: update documentation with enhancements")
Reported-by: Stephen Rothwell <redacted>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
Documentation/networking/nf_flowtable.rst | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/Documentation/networking/nf_flowtable.rst b/Documentation/networking/nf_flowtable.rst
index d87f253b9d39..d757c21c10f2 100644
--- a/Documentation/networking/nf_flowtable.rst
+++ b/Documentation/networking/nf_flowtable.rst@@ -112,6 +112,7 @@ You can identify offloaded flows through the [OFFLOAD] tag when listing your connection tracking table. :: + # conntrack -L tcp 6 src=10.141.10.2 dst=192.168.10.2 sport=52728 dport=5201 src=192.168.10.2 dst=192.168.10.1 sport=5201 dport=52728 [OFFLOAD] mark=0 use=2
@@ -138,6 +139,7 @@ allows the flowtable to define a fastpath bypass between the bridge ports device (represented as eth0) in your switch/router. :: + fastpath bypass .-------------------------. / \
@@ -168,12 +170,12 @@ connection tracking entry by specifying the counter statement in your flowtable definition, e.g. :: + table inet x { flowtable f { hook ingress priority 0; devices = { eth0, eth1 }; counter } - ... } Counter support is available since Linux kernel 5.7.
@@ -185,12 +187,12 @@ If your network device provides hardware offload support, you can turn it on by means of the 'offload' flag in your flowtable definition, e.g. :: + table inet x { flowtable f { hook ingress priority 0; devices = { eth0, eth1 }; flags offload; } - ... } There is a workqueue that adds the flows to the hardware. Note that a few
--
2.30.2