Thread (24 messages) flat view 24 messages, 4 authors, 2021-03-18
STALE1973d

Revision v1 of 2 in this series.

Revisions (2)
  1. v1 current
  2. v3 [diff vs current]

[PATCH net-next 3/5] net: dsa: mv88e6xxx: Flood all traffic classes on standalone ports

From: Tobias Waldekranz <tobias@waldekranz.com>
Date: 2021-03-15 21:15:45
Subsystem: marvell 88e6xxx ethernet switch fabric driver, networking drivers, networking [dsa], the rest · Maintainers: Andrew Lunn, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Linus Torvalds

In accordance with the comment in dsa_port_bridge_leave, standalone
ports shall be configured to flood all types of traffic. This change
aligns the mv88e6xxx driver with that policy.

Previously a standalone port would initially not egress any unknown
traffic, but after joining and then leaving a bridge, it would.

This does not matter that much since we only ever send FROM_CPUs on
standalone ports, but it seems prudent to make sure that the initial
values match those that are applied after a bridging/unbridging cycle.

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 86027e98d83d..01e4ac32d1e5 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2457,19 +2457,15 @@ static int mv88e6xxx_setup_message_port(struct mv88e6xxx_chip *chip, int port)
 
 static int mv88e6xxx_setup_egress_floods(struct mv88e6xxx_chip *chip, int port)
 {
-	struct dsa_switch *ds = chip->ds;
-	bool flood;
 	int err;
 
-	/* Upstream ports flood frames with unknown unicast or multicast DA */
-	flood = dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port);
 	if (chip->info->ops->port_set_ucast_flood) {
-		err = chip->info->ops->port_set_ucast_flood(chip, port, flood);
+		err = chip->info->ops->port_set_ucast_flood(chip, port, true);
 		if (err)
 			return err;
 	}
 	if (chip->info->ops->port_set_mcast_flood) {
-		err = chip->info->ops->port_set_mcast_flood(chip, port, flood);
+		err = chip->info->ops->port_set_mcast_flood(chip, port, true);
 		if (err)
 			return err;
 	}
-- 
2.25.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help