[net PATCH] ixgbe: Fix NULL pointer dereference in ethtool loopback test

From: Alexander Duyck <alexanderduyck@fb.com>

The ixgbe driver currently generates a NULL pointer dereference when
performing the ethtool loopback test. This is due to the fact that there
isn't a q_vector associated with the test ring when it is setup as
interrupts are not normally added to the test rings.

To address this I have added code that will check for a q_vector before
returning a napi_id value. If a q_vector is not present it will return a
value of 0.

Fixes: b02e5a0ebb17 ("xsk: Propagate napi_id to XDP socket Rx path")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index fae84202d870..724cdd669957 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

@@ -6534,6 +6534,13 @@ static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
 	return err;
 }
 
+static int ixgbe_rx_napi_id(struct ixgbe_ring *rx_ring)
+{
+	struct ixgbe_q_vector *q_vector = rx_ring->q_vector;
+
+	return q_vector ? q_vector->napi.napi_id : 0;
+}
+
 /**
  * ixgbe_setup_rx_resources - allocate Rx resources (Descriptors)
  * @adapter: pointer to ixgbe_adapter

@@ -6582,7 +6589,7 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
 
 	/* XDP RX-queue info */
 	if (xdp_rxq_info_reg(&rx_ring->xdp_rxq, adapter->netdev,
-			     rx_ring->queue_index, rx_ring->q_vector->napi.napi_id) < 0)
+			     rx_ring->queue_index, ixgbe_rx_napi_id(rx_ring)) < 0)
 		goto err;
 
 	rx_ring->xdp_prog = adapter->xdp_prog;

On Mon, 8 Mar 2021 at 21:42, Alexander Duyck [off-list ref] wrote:

From: Alexander Duyck <alexanderduyck@fb.com>

The ixgbe driver currently generates a NULL pointer dereference when
performing the ethtool loopback test. This is due to the fact that there
isn't a q_vector associated with the test ring when it is setup as
interrupts are not normally added to the test rings.

To address this I have added code that will check for a q_vector before
returning a napi_id value. If a q_vector is not present it will return a
value of 0.

Fixes: b02e5a0ebb17 ("xsk: Propagate napi_id to XDP socket Rx path")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>

Thanks Alex!

Acked-by: Björn Töpel <redacted>

I'll look into if this applies to the other Intel drivers as well.


Björn
[...]

-----Original Message-----
From: Alexander Duyck <redacted>
Sent: Monday, March 8, 2021 12:42 PM
To: intel-wired-lan@lists.osuosl.org
Cc: Brandeburg, Jesse <redacted>; Nguyen, Anthony L
[off-list ref]; netdev@vger.kernel.org
Subject: [net PATCH] ixgbe: Fix NULL pointer dereference in ethtool loopback test

From: Alexander Duyck <alexanderduyck@fb.com>

The ixgbe driver currently generates a NULL pointer dereference when
performing the ethtool loopback test. This is due to the fact that there isn't a
q_vector associated with the test ring when it is setup as interrupts are not
normally added to the test rings.

To address this I have added code that will check for a q_vector before returning
a napi_id value. If a q_vector is not present it will return a value of 0.

Fixes: b02e5a0ebb17 ("xsk: Propagate napi_id to XDP socket Rx path")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |    9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

Tested-by: Dave Switzer <redacted>