Re: [PATCH net 1/2] net: enetc: set MAC RX FIFO to recommended value

Hello:

This series was applied to netdev/net.git (refs/heads/master):

On Sun,  7 Mar 2021 15:23:38 +0200 you wrote:

From: Alex Marginean <redacted>

On LS1028A, the MAC RX FIFO defaults to the value 2, which is too high
and may lead to RX lock-up under traffic at a rate higher than 6 Gbps.
Set it to 1 instead, as recommended by the hardware design team and by
later versions of the ENETC block guide.

[...]

Here is the summary with links:
  - [net,1/2] net: enetc: set MAC RX FIFO to recommended value
    https://git.kernel.org/netdev/net/c/1b2395dfff5b
  - [net,2/2] net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
    https://git.kernel.org/netdev/net/c/29d98f54a4fe

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html