[PATCH net-next v4 2/9] net: phy: icplus: use PHY_ID_MATCH_EXACT() for IP101A/G
flat view
STALE2080d
REVIEWED: 1 (1M)
From: Michael Walle <hidden>
Date: 2021-02-11 07:58:36
Also in:
lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v4 of 4 in this series; 1 review trailer (1 from subsystem maintainers).
Revisions (4)
- v1 [diff vs current]
- v2 [diff vs current]
- v2 [diff vs current]
- v4 current
According to the datasheet of the IP101A/G there is no revision field and MII_PHYSID2 always reads as 0x0c54. Use PHY_ID_MATCH_EXACT() then. Signed-off-by: Michael Walle <redacted> Reviewed-by: Andrew Lunn <andrew@lunn.ch> --- Changes since v3: - none Changes since v2: - none Changes since v1: - none drivers/net/phy/icplus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index 4407b1eb1a3d..ae3cf61c5ac2 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c@@ -349,7 +349,7 @@ static struct phy_driver icplus_driver[] = { .suspend = genphy_suspend, .resume = genphy_resume, }, { - PHY_ID_MATCH_MODEL(IP101A_PHY_ID), + PHY_ID_MATCH_EXACT(IP101A_PHY_ID), .name = "ICPlus IP101A/G", /* PHY_BASIC_FEATURES */ .probe = ip101a_g_probe,
@@ -365,7 +365,7 @@ module_phy_driver(icplus_driver); static struct mdio_device_id __maybe_unused icplus_tbl[] = { { PHY_ID_MATCH_MODEL(IP175C_PHY_ID) }, { PHY_ID_MATCH_MODEL(IP1001_PHY_ID) }, - { PHY_ID_MATCH_MODEL(IP101A_PHY_ID) }, + { PHY_ID_MATCH_EXACT(IP101A_PHY_ID) }, { } };
--
2.20.1