[Patch v4 net-next 7/7] octeontx2-pf: ethtool physical link configuration
From: Hariprasad Kelam <hidden>
Date: 2021-02-09 10:49:23
Also in:
lkml
Subsystem:
marvell octeontx2 physical function driver, networking drivers, the rest · Maintainers:
Sunil Goutham, Geetha sowjanya, Ratheesh Kannoth, Subbaraya Sundeep, Bharat Bhushan, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Christina Jacob <redacted> Register set_link_ksetting callback with driver such that link configurations parameters like advertised mode,speed, duplex and autoneg can be configured. below command ethtool -s eth0 advertise 0x1 speed 10 duplex full autoneg on Signed-off-by: Christina Jacob <redacted> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <redacted> Reviewed-by: Jesse Brandeburg <redacted> --- .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 63 ++++++++++++++++++++++ 1 file changed, 63 insertions(+)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
index d5d9b1d..237e5d3 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c@@ -1157,6 +1157,68 @@ static int otx2_get_link_ksettings(struct net_device *netdev, return 0; } +static void otx2_get_advertised_mode(const struct ethtool_link_ksettings *cmd, + u64 *mode) +{ + u32 bit_pos; + + /* Firmware does not support requesting multiple advertised modes + * return first set bit + */ + bit_pos = find_first_bit(cmd->link_modes.advertising, + __ETHTOOL_LINK_MODE_MASK_NBITS); + if (bit_pos != __ETHTOOL_LINK_MODE_MASK_NBITS) + *mode = bit_pos; +} + +static int otx2_set_link_ksettings(struct net_device *netdev, + const struct ethtool_link_ksettings *cmd) +{ + struct otx2_nic *pf = netdev_priv(netdev); + struct ethtool_link_ksettings cur_ks; + struct cgx_set_link_mode_req *req; + struct mbox *mbox = &pf->mbox; + int err = 0; + + memset(&cur_ks, 0, sizeof(struct ethtool_link_ksettings)); + + if (!ethtool_validate_speed(cmd->base.speed) || + !ethtool_validate_duplex(cmd->base.duplex)) + return -EINVAL; + + if (cmd->base.autoneg != AUTONEG_ENABLE && + cmd->base.autoneg != AUTONEG_DISABLE) + return -EINVAL; + + otx2_get_link_ksettings(netdev, &cur_ks); + + /* Check requested modes against supported modes by hardware */ + if (!bitmap_subset(cmd->link_modes.advertising, + cur_ks.link_modes.supported, + __ETHTOOL_LINK_MODE_MASK_NBITS)) + return -EINVAL; + + mutex_lock(&mbox->lock); + req = otx2_mbox_alloc_msg_cgx_set_link_mode(&pf->mbox); + if (!req) { + err = -ENOMEM; + goto end; + } + + req->args.speed = cmd->base.speed; + /* firmware expects 1 for half duplex and 0 for full duplex + * hence inverting + */ + req->args.duplex = cmd->base.duplex ^ 0x1; + req->args.an = cmd->base.autoneg; + otx2_get_advertised_mode(cmd, &req->args.mode); + + err = otx2_sync_mbox_msg(&pf->mbox); +end: + mutex_unlock(&mbox->lock); + return err; +} + static const struct ethtool_ops otx2_ethtool_ops = { .supported_coalesce_params = ETHTOOL_COALESCE_USECS | ETHTOOL_COALESCE_MAX_FRAMES,
@@ -1187,6 +1249,7 @@ static const struct ethtool_ops otx2_ethtool_ops = { .get_fecparam = otx2_get_fecparam, .set_fecparam = otx2_set_fecparam, .get_link_ksettings = otx2_get_link_ksettings, + .set_link_ksettings = otx2_set_link_ksettings, }; void otx2_set_ethtool_ops(struct net_device *netdev) --
2.7.4