[net-next PATCH v5 00/15] ACPI support for dpaa2 driver

@@ -846,6 +846,27 @@ static int get_phy_c22_id(struct mii_bus *bus, int addr, u32 *phy_id)
 	return 0;
 }
 
+/* Extract the phy ID from the compatible string of the form
+ * ethernet-phy-idAAAA.BBBB.
+ */
+int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id)
+{
+	unsigned int upper, lower;
+	const char *cp;
+	int ret;
+
+	ret = fwnode_property_read_string(fwnode, "compatible", &cp);
+	if (ret)
+		return ret;
+
+	if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) != 2)
+		return -EINVAL;
+
+	*phy_id = ((upper & GENMASK(15, 0)) << 16) | (lower & GENMASK(15, 0));
+	return 0;
+}
+EXPORT_SYMBOL(fwnode_get_phy_id);
+
 /**
  * get_phy_device - reads the specified PHY device and returns its @phy_device
  *		    struct

@@ -1349,6 +1349,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
 				     bool is_c45,
 				     struct phy_c45_device_ids *c45_ids);
 #if IS_ENABLED(CONFIG_PHYLIB)
+int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id);
 struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode);
 struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode);
 struct phy_device *device_phy_find_device(struct device *dev);

@@ -1357,6 +1358,10 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
 int phy_device_register(struct phy_device *phy);
 void phy_device_free(struct phy_device *phydev);
 #else
+static inline int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id)
+{
+	return 0;
+}
 static inline
 struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
 {

@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+MDIO bus and PHYs in ACPI
+=========================
+
+The PHYs on an MDIO bus [1] are probed and registered using
+fwnode_mdiobus_register_phy().
+
+Later, for connecting these PHYs to MAC, the PHYs registered on the
+MDIO bus have to be referenced.
+
+This document introduces two _DSD properties that are to be used
+for connecting PHYs on the MDIO bus [3] to the MAC layer.
+
+These properties are defined in accordance with the "Device
+Properties UUID For _DSD" [2] document and the
+daffd814-6eba-4d8c-8a91-bc9bbf4aa301 UUID must be used in the Device
+Data Descriptors containing them.
+
+phy-handle
+----------
+For each MAC node, a device property "phy-handle" is used to reference
+the PHY that is registered on an MDIO bus. This is mandatory for
+network interfaces that have PHYs connected to MAC via MDIO bus.
+
+During the MDIO bus driver initialization, PHYs on this bus are probed
+using the _ADR object as shown below and are registered on the MDIO bus.
+
+::
+      Scope(\_SB.MDI0)
+      {
+        Device(PHY1) {
+          Name (_ADR, 0x1)
+        } // end of PHY1
+
+        Device(PHY2) {
+          Name (_ADR, 0x2)
+        } // end of PHY2
+      }
+
+Later, during the MAC driver initialization, the registered PHY devices
+have to be retrieved from the MDIO bus. For this, the MAC driver need
+references to the previously registered PHYs which are provided
+as device object references (e.g. \_SB.MDI0.PHY1).
+
+phy-mode
+--------
+The "phy-mode" _DSD property is used to describe the connection to
+the PHY. The valid values for "phy-mode" are defined in [4].
+
+The following ASL example illustrates the usage of these properties.
+
+DSDT entry for MDIO node
+------------------------
+
+The MDIO bus has an SoC component (MDIO controller) and a platform
+component (PHYs on the MDIO bus).
+
+a) Silicon Component
+This node describes the MDIO controller, MDI0
+---------------------------------------------
+::
+	Scope(_SB)
+	{
+	  Device(MDI0) {
+	    Name(_HID, "NXP0006")
+	    Name(_CCA, 1)
+	    Name(_UID, 0)
+	    Name(_CRS, ResourceTemplate() {
+	      Memory32Fixed(ReadWrite, MDI0_BASE, MDI_LEN)
+	      Interrupt(ResourceConsumer, Level, ActiveHigh, Shared)
+	       {
+		 MDI0_IT
+	       }
+	    }) // end of _CRS for MDI0
+	  } // end of MDI0
+	}
+
+b) Platform Component
+The PHY1 and PHY2 nodes represent the PHYs connected to MDIO bus MDI0
+---------------------------------------------------------------------
+::
+	Scope(\_SB.MDI0)
+	{
+	  Device(PHY1) {
+	    Name (_ADR, 0x1)
+	  } // end of PHY1
+
+	  Device(PHY2) {
+	    Name (_ADR, 0x2)
+	  } // end of PHY2
+	}
+
+DSDT entries representing MAC nodes
+-----------------------------------
+
+Below are the MAC nodes where PHY nodes are referenced.
+phy-mode and phy-handle are used as explained earlier.
+------------------------------------------------------
+::
+	Scope(\_SB.MCE0.PR17)
+	{
+	  Name (_DSD, Package () {
+	     ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+		 Package () {
+		     Package (2) {"phy-mode", "rgmii-id"},
+		     Package (2) {"phy-handle", \_SB.MDI0.PHY1}
+	      }
+	   })
+	}
+
+	Scope(\_SB.MCE0.PR18)
+	{
+	  Name (_DSD, Package () {
+	    ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+		Package () {
+		    Package (2) {"phy-mode", "rgmii-id"},
+		    Package (2) {"phy-handle", \_SB.MDI0.PHY2}}
+	    }
+	  })
+	}
+
+References
+==========
+
+[1] Documentation/networking/phy.rst
+
+[2] https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
+
+[3] Documentation/firmware-guide/acpi/DSD-properties-rules.rst
+
+[4] Documentation/devicetree/bindings/net/ethernet-controller.yaml

@@ -29,17 +29,7 @@ MODULE_LICENSE("GPL");
  * ethernet-phy-idAAAA.BBBB */
 static int of_get_phy_id(struct device_node *device, u32 *phy_id)
 {
-	struct property *prop;
-	const char *cp;
-	unsigned int upper, lower;
-
-	of_property_for_each_string(device, "compatible", prop, cp) {
-		if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) == 2) {
-			*phy_id = ((upper & 0xFFFF) << 16) | (lower & 0xFFFF);
-			return 0;
-		}
-	}
-	return -EINVAL;
+	return fwnode_get_phy_id(of_fwnode_handle(device), phy_id);
 }
 
 static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)

@@ -347,16 +347,7 @@ EXPORT_SYMBOL(of_mdiobus_register);
  */
 struct mdio_device *of_mdio_find_device(struct device_node *np)
 {
-	struct device *d;
-
-	if (!np)
-		return NULL;
-
-	d = bus_find_device_by_of_node(&mdio_bus_type, np);
-	if (!d)
-		return NULL;
-
-	return to_mdio_device(d);
+	return fwnode_mdio_find_device(of_fwnode_handle(np));
 }
 EXPORT_SYMBOL(of_mdio_find_device);
 

@@ -2829,6 +2829,29 @@ static bool phy_drv_supports_irq(struct phy_driver *phydrv)
 	return phydrv->config_intr && phydrv->handle_interrupt;
 }
 
+/**
+ * fwnode_mdio_find_device - Given a fwnode, find the mdio_device
+ * @np: pointer to the mdio_device's fwnode
+ *
+ * If successful, returns a pointer to the mdio_device with the embedded
+ * struct device refcount incremented by one, or NULL on failure.
+ * The caller should call put_device() on the mdio_device after its use
+ */
+struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
+{
+	struct device *d;
+
+	if (!fwnode)
+		return NULL;
+
+	d = bus_find_device_by_fwnode(&mdio_bus_type, fwnode);
+	if (!d)
+		return NULL;
+
+	return to_mdio_device(d);
+}
+EXPORT_SYMBOL(fwnode_mdio_find_device);
+
 /**
  * phy_probe - probe and init a PHY device
  * @dev: device to probe and init

@@ -1349,11 +1349,17 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
 				     bool is_c45,
 				     struct phy_c45_device_ids *c45_ids);
 #if IS_ENABLED(CONFIG_PHYLIB)
+struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode);
 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
 int phy_device_register(struct phy_device *phy);
 void phy_device_free(struct phy_device *phydev);
 #else
 static inline
+struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
+{
+	return 0;
+}
+static inline
 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
 {
 	return NULL;

@@ -5,6 +5,7 @@
  *
  * Copyright (C) 2015 Russell King
  */
+#include <linux/acpi.h>
 #include <linux/ethtool.h>
 #include <linux/export.h>
 #include <linux/gpio/consumer.h>

@@ -1120,6 +1121,61 @@ int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
 }
 EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
 
+/**
+ * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode.
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @fwnode: a pointer to a &struct fwnode_handle.
+ * @flags: PHY-specific flags to communicate to the PHY device driver
+ *
+ * Connect the phy specified @fwnode to the phylink instance specified
+ * by @pl.
+ *
+ * Returns 0 on success or a negative errno.
+ */
+int phylink_fwnode_phy_connect(struct phylink *pl,
+			       struct fwnode_handle *fwnode,
+			       u32 flags)
+{
+	struct fwnode_handle *phy_fwnode;
+	struct phy_device *phy_dev;
+	int ret;
+
+	if (is_of_node(fwnode)) {
+		/* Fixed links and 802.3z are handled without needing a PHY */
+		if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
+		    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
+		     phy_interface_mode_is_8023z(pl->link_interface)))
+			return 0;
+	}
+
+	phy_fwnode = fwnode_get_phy_node(fwnode);
+	if (IS_ERR(phy_fwnode)) {
+		if (pl->cfg_link_an_mode == MLO_AN_PHY)
+			return -ENODEV;
+		return 0;
+	}
+
+	phy_dev = fwnode_phy_find_device(phy_fwnode);
+	/* We're done with the phy_node handle */
+	fwnode_handle_put(phy_fwnode);
+	if (!phy_dev)
+		return -ENODEV;
+
+	ret = phy_attach_direct(pl->netdev, phy_dev, flags,
+				pl->link_interface);
+	if (ret) {
+		phy_device_free(phy_dev);
+		return ret;
+	}
+
+	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
+	if (ret)
+		phy_detach(phy_dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect);
+
 /**
  * phylink_disconnect_phy() - disconnect any PHY attached to the phylink
  *   instance.

@@ -439,6 +439,9 @@ void phylink_destroy(struct phylink *);
 
 int phylink_connect_phy(struct phylink *, struct phy_device *);
 int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
+int phylink_fwnode_phy_connect(struct phylink *pl,
+			       struct fwnode_handle *fwnode,
+			       u32 flags);
 void phylink_disconnect_phy(struct phylink *);
 
 void phylink_mac_change(struct phylink *, bool up);

@@ -360,18 +360,7 @@ EXPORT_SYMBOL(of_mdio_find_device);
  */
 struct phy_device *of_phy_find_device(struct device_node *phy_np)
 {
-	struct mdio_device *mdiodev;
-
-	mdiodev = of_mdio_find_device(phy_np);
-	if (!mdiodev)
-		return NULL;
-
-	if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
-		return to_phy_device(&mdiodev->dev);
-
-	put_device(&mdiodev->dev);
-
-	return NULL;
+	return fwnode_phy_find_device(of_fwnode_handle(phy_np));
 }
 EXPORT_SYMBOL(of_phy_find_device);
 

@@ -9,6 +9,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/acpi.h>
 #include <linux/bitmap.h>
 #include <linux/delay.h>
 #include <linux/errno.h>

@@ -2852,6 +2853,67 @@ struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
 }
 EXPORT_SYMBOL(fwnode_mdio_find_device);
 
+/**
+ * fwnode_phy_find_device - For provided phy_fwnode, find phy_device.
+ *
+ * @phy_fwnode: Pointer to the phy's fwnode.
+ *
+ * If successful, returns a pointer to the phy_device with the embedded
+ * struct device refcount incremented by one, or NULL on failure.
+ */
+struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode)
+{
+	struct mdio_device *mdiodev;
+
+	mdiodev = fwnode_mdio_find_device(phy_fwnode);
+	if (!mdiodev)
+		return NULL;
+
+	if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
+		return to_phy_device(&mdiodev->dev);
+
+	put_device(&mdiodev->dev);
+
+	return NULL;
+}
+EXPORT_SYMBOL(fwnode_phy_find_device);
+
+/**
+ * device_phy_find_device - For the given device, get the phy_device
+ * @dev: Pointer to the given device
+ *
+ * Refer return conditions of fwnode_phy_find_device().
+ */
+struct phy_device *device_phy_find_device(struct device *dev)
+{
+	return fwnode_phy_find_device(dev_fwnode(dev));
+}
+EXPORT_SYMBOL_GPL(device_phy_find_device);
+
+/**
+ * fwnode_get_phy_node - Get the phy_node using the named reference.
+ * @fwnode: Pointer to fwnode from which phy_node has to be obtained.
+ *
+ * Refer return conditions of fwnode_find_reference().
+ * For ACPI, only "phy-handle" is supported. Legacy DT properties "phy"
+ * and "phy-device" are not supported in ACPI. DT supports all the three
+ * named references to the phy node.
+ */
+struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode)
+{
+	struct fwnode_handle *phy_node;
+
+	/* Only phy-handle is used for ACPI */
+	phy_node = fwnode_find_reference(fwnode, "phy-handle", 0);
+	if (is_acpi_node(fwnode) || !IS_ERR(phy_node))
+		return phy_node;
+	phy_node = fwnode_find_reference(fwnode, "phy", 0);
+	if (IS_ERR(phy_node))
+		phy_node = fwnode_find_reference(fwnode, "phy-device", 0);
+	return phy_node;
+}
+EXPORT_SYMBOL_GPL(fwnode_get_phy_node);
+
 /**
  * phy_probe - probe and init a PHY device
  * @dev: device to probe and init

@@ -1350,6 +1350,9 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
 				     struct phy_c45_device_ids *c45_ids);
 #if IS_ENABLED(CONFIG_PHYLIB)
 struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode);
+struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode);
+struct phy_device *device_phy_find_device(struct device *dev);
+struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode);
 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
 int phy_device_register(struct phy_device *phy);
 void phy_device_free(struct phy_device *phydev);

@@ -1359,6 +1362,23 @@ struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
 {
 	return 0;
 }
+static inline
+struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode)
+{
+	return NULL;
+}
+
+static inline struct phy_device *device_phy_find_device(struct device *dev)
+{
+	return NULL;
+}
+
+static inline
+struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode)
+{
+	return NULL;
+}
+
 static inline
 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
 {

@@ -32,7 +32,7 @@ static int of_get_phy_id(struct device_node *device, u32 *phy_id)
 	return fwnode_get_phy_id(of_fwnode_handle(device), phy_id);
 }
 
-static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
+struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
 {
 	struct of_phandle_args arg;
 	int err;

@@ -49,6 +49,7 @@ static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
 
 	return register_mii_timestamper(arg.np, arg.args[0]);
 }
+EXPORT_SYMBOL(of_find_mii_timestamper);
 
 int of_mdiobus_phy_device_register(struct mii_bus *mdio, struct phy_device *phy,
 			      struct device_node *child, u32 addr)

@@ -8,6 +8,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/acpi.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/errno.h>

@@ -106,6 +107,70 @@ int mdiobus_unregister_device(struct mdio_device *mdiodev)
 }
 EXPORT_SYMBOL(mdiobus_unregister_device);
 
+int fwnode_mdiobus_register_phy(struct mii_bus *bus,
+				struct fwnode_handle *child, u32 addr)
+{
+	struct mii_timestamper *mii_ts;
+	struct phy_device *phy;
+	bool is_c45 = false;
+	u32 phy_id;
+	int rc;
+
+	if (is_of_node(child)) {
+		mii_ts = of_find_mii_timestamper(to_of_node(child));
+		if (IS_ERR(mii_ts))
+			return PTR_ERR(mii_ts);
+	}
+
+	rc = fwnode_property_match_string(child, "compatible", "ethernet-phy-ieee802.3-c45");
+	if (rc >= 0)
+		is_c45 = true;
+
+	if (is_c45 || fwnode_get_phy_id(child, &phy_id))
+		phy = get_phy_device(bus, addr, is_c45);
+	else
+		phy = phy_device_create(bus, addr, phy_id, 0, NULL);
+	if (IS_ERR(phy)) {
+		if (mii_ts && is_of_node(child))
+			unregister_mii_timestamper(mii_ts);
+		return PTR_ERR(phy);
+	}
+
+	if (is_acpi_node(child)) {
+		phy->irq = bus->irq[addr];
+
+		/* Associate the fwnode with the device structure so it
+		 * can be looked up later.
+		 */
+		phy->mdio.dev.fwnode = child;
+
+		/* All data is now stored in the phy struct, so register it */
+		rc = phy_device_register(phy);
+		if (rc) {
+			phy_device_free(phy);
+			fwnode_handle_put(phy->mdio.dev.fwnode);
+			return rc;
+		}
+	} else if (is_of_node(child)) {
+		rc = of_mdiobus_phy_device_register(bus, phy, to_of_node(child), addr);
+		if (rc) {
+			if (mii_ts)
+				unregister_mii_timestamper(mii_ts);
+			phy_device_free(phy);
+			return rc;
+		}
+
+		/* phy->mii_ts may already be defined by the PHY driver. A
+		 * mii_timestamper probed via the device tree will still have
+		 * precedence.
+		 */
+		if (mii_ts)
+			phy->mii_ts = mii_ts;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(fwnode_mdiobus_register_phy);
+
 struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr)
 {
 	struct mdio_device *mdiodev = bus->mdio_map[addr];

@@ -381,6 +381,8 @@ int mdiobus_register_device(struct mdio_device *mdiodev);
 int mdiobus_unregister_device(struct mdio_device *mdiodev);
 bool mdiobus_is_registered_device(struct mii_bus *bus, int addr);
 struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr);
+int fwnode_mdiobus_register_phy(struct mii_bus *bus,
+				      struct fwnode_handle *child, u32 addr);
 
 /**
  * mdio_module_driver() - Helper macro for registering mdio drivers

@@ -34,6 +34,7 @@ struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np);
 int of_phy_register_fixed_link(struct device_node *np);
 void of_phy_deregister_fixed_link(struct device_node *np);
 bool of_phy_is_fixed_link(struct device_node *np);
+struct mii_timestamper *of_find_mii_timestamper(struct device_node *np);
 int of_mdiobus_phy_device_register(struct mii_bus *mdio, struct phy_device *phy,
 				   struct device_node *child, u32 addr);
 

@@ -128,7 +129,10 @@ static inline bool of_phy_is_fixed_link(struct device_node *np)
 {
 	return false;
 }
-
+static inline struct mii_timestamper *of_find_mii_timestamper(struct device_node *np)
+{
+	return NULL;
+}
 static inline int of_mdiobus_phy_device_register(struct mii_bus *mdio,
 					    struct phy_device *phy,
 					    struct device_node *child, u32 addr)

@@ -296,6 +296,20 @@ acpi_evaluate_integer(acpi_handle handle,
 
 EXPORT_SYMBOL(acpi_evaluate_integer);
 
+int acpi_get_local_address(acpi_handle handle, u32 *addr)
+{
+	unsigned long long adr;
+	acpi_status status;
+
+	status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr);
+	if (ACPI_FAILURE(status))
+		return -ENODATA;
+
+	*addr = (u32)adr;
+	return 0;
+}
+EXPORT_SYMBOL(acpi_get_local_address);
+
 acpi_status
 acpi_evaluate_reference(acpi_handle handle,
 			acpi_string pathname,

@@ -699,6 +699,8 @@ static inline u64 acpi_arch_get_root_pointer(void)
 }
 #endif
 
+int acpi_get_local_address(acpi_handle handle, u32 *addr);
+
 #else	/* !CONFIG_ACPI */
 
 #define acpi_disabled 1

@@ -946,6 +948,11 @@ static inline struct acpi_device *acpi_resource_consumer(struct resource *res)
 	return NULL;
 }
 
+static inline int acpi_get_local_address(acpi_handle handle, u32 *addr)
+{
+	return -ENODEV;
+}
+
 #endif	/* !CONFIG_ACPI */
 
 #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC

@@ -98,45 +98,7 @@ EXPORT_SYMBOL(of_mdiobus_phy_device_register);
 static int of_mdiobus_register_phy(struct mii_bus *mdio,
 				    struct device_node *child, u32 addr)
 {
-	struct mii_timestamper *mii_ts;
-	struct phy_device *phy;
-	bool is_c45;
-	int rc;
-	u32 phy_id;
-
-	mii_ts = of_find_mii_timestamper(child);
-	if (IS_ERR(mii_ts))
-		return PTR_ERR(mii_ts);
-
-	is_c45 = of_device_is_compatible(child,
-					 "ethernet-phy-ieee802.3-c45");
-
-	if (!is_c45 && !of_get_phy_id(child, &phy_id))
-		phy = phy_device_create(mdio, addr, phy_id, 0, NULL);
-	else
-		phy = get_phy_device(mdio, addr, is_c45);
-	if (IS_ERR(phy)) {
-		if (mii_ts)
-			unregister_mii_timestamper(mii_ts);
-		return PTR_ERR(phy);
-	}
-
-	rc = of_mdiobus_phy_device_register(mdio, phy, child, addr);
-	if (rc) {
-		if (mii_ts)
-			unregister_mii_timestamper(mii_ts);
-		phy_device_free(phy);
-		return rc;
-	}
-
-	/* phy->mii_ts may already be defined by the PHY driver. A
-	 * mii_timestamper probed via the device tree will still have
-	 * precedence.
-	 */
-	if (mii_ts)
-		phy->mii_ts = mii_ts;
-
-	return 0;
+	return fwnode_mdiobus_register_phy(mdio, of_fwnode_handle(child), addr);
 }
 
 static int of_mdiobus_register_device(struct mii_bus *mdio,

@@ -2,6 +2,7 @@
  * QorIQ 10G MDIO Controller
  *
  * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2021 NXP
  *
  * Authors: Andy Fleming <afleming@freescale.com>
  *          Timur Tabi <timur@freescale.com>

@@ -243,10 +244,9 @@ static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
 
 static int xgmac_mdio_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
-	struct mii_bus *bus;
-	struct resource *res;
 	struct mdio_fsl_priv *priv;
+	struct resource *res;
+	struct mii_bus *bus;
 	int ret;
 
 	/* In DPAA-1, MDIO is one of the many FMan sub-devices. The FMan

@@ -279,13 +279,16 @@ static int xgmac_mdio_probe(struct platform_device *pdev)
 		goto err_ioremap;
 	}
 
+	/* For both ACPI and DT cases, endianness of MDIO controller
+	 * needs to be specified using "little-endian" property.
+	 */
 	priv->is_little_endian = device_property_read_bool(&pdev->dev,
 							   "little-endian");
 
 	priv->has_a011043 = device_property_read_bool(&pdev->dev,
 						      "fsl,erratum-a011043");
 
-	ret = of_mdiobus_register(bus, np);
+	ret = fwnode_mdiobus_register(bus, pdev->dev.fwnode);
 	if (ret) {
 		dev_err(&pdev->dev, "cannot register MDIO bus\n");
 		goto err_registration;

@@ -6669,6 +6669,7 @@ F:	Documentation/devicetree/bindings/net/mdio*
 F:	Documentation/devicetree/bindings/net/qca,ar803x.yaml
 F:	Documentation/networking/phy.rst
 F:	drivers/net/mdio/
+F:	drivers/net/mdio/acpi_mdio.c
 F:	drivers/net/mdio/of_mdio.c
 F:	drivers/net/pcs/
 F:	drivers/net/phy/

@@ -27,6 +27,13 @@ config OF_MDIO
 	help
 	  OpenFirmware MDIO bus (Ethernet PHY) accessors
 
+config ACPI_MDIO
+	def_tristate PHYLIB
+	depends on ACPI
+	depends on PHYLIB
+	help
+	  ACPI MDIO bus (Ethernet PHY) accessors
+
 if MDIO_BUS
 
 config MDIO_DEVRES

@@ -2,6 +2,7 @@
 # Makefile for Linux MDIO bus drivers
 
 obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
+obj-$(CONFIG_ACPI_MDIO)	+= acpi_mdio.o
 
 obj-$(CONFIG_MDIO_ASPEED)		+= mdio-aspeed.o
 obj-$(CONFIG_MDIO_BCM_IPROC)		+= mdio-bcm-iproc.o

@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ACPI helpers for the MDIO (Ethernet PHY) API
+ *
+ * This file provides helper functions for extracting PHY device information
+ * out of the ACPI ASL and using it to populate an mii_bus.
+ */
+
+#include <linux/acpi.h>
+#include <linux/acpi_mdio.h>
+
+MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>");
+MODULE_LICENSE("GPL");
+
+/**
+ * acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL.
+ *
+ * @mdio: pointer to mii_bus structure
+ * @fwnode: pointer to fwnode of MDIO bus.
+ *
+ * This function registers the mii_bus structure and registers a phy_device
+ * for each child node of @fwnode.
+ */
+int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
+{
+	struct fwnode_handle *child;
+	u32 addr;
+	int ret;
+
+	/* Mask out all PHYs from auto probing. */
+	mdio->phy_mask = ~0;
+	ret = mdiobus_register(mdio);
+	if (ret)
+		return ret;
+
+	mdio->dev.fwnode = fwnode;
+/* Loop over the child nodes and register a phy_device for each PHY */
+	fwnode_for_each_child_node(fwnode, child) {
+		ret = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &addr);
+		if ((ret) || addr >= PHY_MAX_ADDR)
+			continue;
+
+		ret = fwnode_mdiobus_register_phy(mdio, child, addr);
+		if (ret == -ENODEV)
+			dev_err(&mdio->dev,
+				"MDIO device at address %d is missing.\n",
+				addr);
+	}
+	return 0;
+}
+EXPORT_SYMBOL(acpi_mdiobus_register);

@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ACPI helpers for the MDIO (Ethernet PHY) API
+ *
+ */
+
+#ifndef __LINUX_ACPI_MDIO_H
+#define __LINUX_ACPI_MDIO_H
+
+#include <linux/device.h>
+#include <linux/phy.h>
+
+#if IS_ENABLED(CONFIG_ACPI_MDIO)
+int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode);
+#else /* CONFIG_ACPI_MDIO */
+static inline int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
+{
+	/*
+	 * Fall back to mdiobus_register() function to register a bus.
+	 * This way, we don't have to keep compat bits around in drivers.
+	 */
+
+	return mdiobus_register(mdio);
+}
+#endif
+
+#endif /* __LINUX_ACPI_MDIO_H */

@@ -1080,44 +1080,7 @@ EXPORT_SYMBOL_GPL(phylink_connect_phy);
 int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
 			   u32 flags)
 {
-	struct device_node *phy_node;
-	struct phy_device *phy_dev;
-	int ret;
-
-	/* Fixed links and 802.3z are handled without needing a PHY */
-	if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
-	    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
-	     phy_interface_mode_is_8023z(pl->link_interface)))
-		return 0;
-
-	phy_node = of_parse_phandle(dn, "phy-handle", 0);
-	if (!phy_node)
-		phy_node = of_parse_phandle(dn, "phy", 0);
-	if (!phy_node)
-		phy_node = of_parse_phandle(dn, "phy-device", 0);
-
-	if (!phy_node) {
-		if (pl->cfg_link_an_mode == MLO_AN_PHY)
-			return -ENODEV;
-		return 0;
-	}
-
-	phy_dev = of_phy_find_device(phy_node);
-	/* We're done with the phy_node handle */
-	of_node_put(phy_node);
-	if (!phy_dev)
-		return -ENODEV;
-
-	ret = phy_attach_direct(pl->netdev, phy_dev, flags,
-				pl->link_interface);
-	if (ret)
-		return ret;
-
-	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
-	if (ret)
-		phy_detach(phy_dev);
-
-	return ret;
+	return phylink_fwnode_phy_connect(pl, of_fwnode_handle(dn), flags);
 }
 EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
 

@@ -1,6 +1,9 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /* Copyright 2019 NXP */
 
+#include <linux/acpi.h>
+#include <linux/property.h>
+
 #include "dpaa2-eth.h"
 #include "dpaa2-mac.h"
 

@@ -34,39 +37,51 @@ static int phy_mode(enum dpmac_eth_if eth_if, phy_interface_t *if_mode)
 	return 0;
 }
 
-/* Caller must call of_node_put on the returned value */
-static struct device_node *dpaa2_mac_get_node(u16 dpmac_id)
+static struct fwnode_handle *dpaa2_mac_get_node(struct device *dev,
+						u16 dpmac_id)
 {
-	struct device_node *dpmacs, *dpmac = NULL;
-	u32 id;
+	struct fwnode_handle *parent, *child  = NULL;
+	struct device_node *dpmacs = NULL;
 	int err;
+	u32 id;
 
-	dpmacs = of_find_node_by_name(NULL, "dpmacs");
-	if (!dpmacs)
-		return NULL;
+	if (is_of_node(dev->parent->fwnode)) {
+		dpmacs = of_find_node_by_name(NULL, "dpmacs");
+		if (!dpmacs)
+			return NULL;
+		parent = of_fwnode_handle(dpmacs);
+	} else if (is_acpi_node(dev->parent->fwnode)) {
+		parent = dev->parent->fwnode;
+	}
 
-	while ((dpmac = of_get_next_child(dpmacs, dpmac)) != NULL) {
-		err = of_property_read_u32(dpmac, "reg", &id);
-		if (err)
+	fwnode_for_each_child_node(parent, child) {
+		err = -EINVAL;
+		if (is_acpi_device_node(child))
+			err = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &id);
+		else if (is_of_node(child))
+			err = of_property_read_u32(to_of_node(child), "reg", &id);
+		if (err) {
 			continue;
-		if (id == dpmac_id)
-			break;
+		} else if (id == dpmac_id) {
+			if (is_of_node(dev->parent->fwnode))
+				of_node_put(dpmacs);
+			return child;
+		}
 	}
-
-	of_node_put(dpmacs);
-
-	return dpmac;
+	if (is_of_node(dev->parent->fwnode))
+		of_node_put(dpmacs);
+	return NULL;
 }
 
-static int dpaa2_mac_get_if_mode(struct device_node *node,
+static int dpaa2_mac_get_if_mode(struct fwnode_handle *dpmac_node,
 				 struct dpmac_attr attr)
 {
 	phy_interface_t if_mode;
 	int err;
 
-	err = of_get_phy_mode(node, &if_mode);
-	if (!err)
-		return if_mode;
+	err = fwnode_get_phy_mode(dpmac_node);
+	if (err > 0)
+		return err;
 
 	err = phy_mode(attr.eth_if, &if_mode);
 	if (!err)

@@ -235,26 +250,27 @@ static const struct phylink_mac_ops dpaa2_mac_phylink_ops = {
 };
 
 static int dpaa2_pcs_create(struct dpaa2_mac *mac,
-			    struct device_node *dpmac_node, int id)
+			    struct fwnode_handle *dpmac_node,
+			    int id)
 {
 	struct mdio_device *mdiodev;
-	struct device_node *node;
+	struct fwnode_handle *node;
 
-	node = of_parse_phandle(dpmac_node, "pcs-handle", 0);
-	if (!node) {
+	node = fwnode_find_reference(dpmac_node, "pcs-handle", 0);
+	if (IS_ERR(node)) {
 		/* do not error out on old DTS files */
 		netdev_warn(mac->net_dev, "pcs-handle node not found\n");
 		return 0;
 	}
 
-	if (!of_device_is_available(node)) {
+	if (!of_device_is_available(to_of_node(node))) {
 		netdev_err(mac->net_dev, "pcs-handle node not available\n");
-		of_node_put(node);
+		of_node_put(to_of_node(node));
 		return -ENODEV;
 	}
 
-	mdiodev = of_mdio_find_device(node);
-	of_node_put(node);
+	mdiodev = fwnode_mdio_find_device(node);
+	fwnode_handle_put(node);
 	if (!mdiodev)
 		return -EPROBE_DEFER;
 

@@ -283,13 +299,12 @@ static void dpaa2_pcs_destroy(struct dpaa2_mac *mac)
 int dpaa2_mac_connect(struct dpaa2_mac *mac)
 {
 	struct net_device *net_dev = mac->net_dev;
-	struct device_node *dpmac_node;
+	struct fwnode_handle *dpmac_node = NULL;
 	struct phylink *phylink;
 	int err;
 
 	mac->if_link_type = mac->attr.link_type;
-
-	dpmac_node = dpaa2_mac_get_node(mac->attr.id);
+	dpmac_node = dpaa2_mac_get_node(&mac->mc_dev->dev, mac->attr.id);
 	if (!dpmac_node) {
 		netdev_err(net_dev, "No dpmac@%d node found.\n", mac->attr.id);
 		return -ENODEV;

@@ -306,7 +321,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	 * error out if the interface mode requests them and there is no PHY
 	 * to act upon them
 	 */
-	if (of_phy_is_fixed_link(dpmac_node) &&
+	if (of_phy_is_fixed_link(to_of_node(dpmac_node)) &&
 	    (mac->if_mode == PHY_INTERFACE_MODE_RGMII_ID ||
 	     mac->if_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
 	     mac->if_mode == PHY_INTERFACE_MODE_RGMII_TXID)) {

@@ -327,7 +342,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	mac->phylink_config.type = PHYLINK_NETDEV;
 
 	phylink = phylink_create(&mac->phylink_config,
-				 of_fwnode_handle(dpmac_node), mac->if_mode,
+				 dpmac_node, mac->if_mode,
 				 &dpaa2_mac_phylink_ops);
 	if (IS_ERR(phylink)) {
 		err = PTR_ERR(phylink);