[PATCH 19/20] net: stmmac: Move DMA stop procedure to HW-setup antagonist

The DMA-channels enabling procedure is performed in the framework of the
the DW *MAC hardware setup method. For the sake of the driver code
coherency let's move the DMA-channels stop function invocation to the
HW-setup antagonist method - stmmac_hw_teardown(). The latter is called in
the stmmac_hw_setup() error path and in the network device release
callback. So by introducing this alteration we not only improve the code
readability, but also make the stmmac_hw_teardown() doing better the HW
cleanup work.

Signed-off-by: Serge Semin <redacted>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d6446aa712e1..3c03b773295a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -2792,6 +2792,8 @@ static void stmmac_hw_teardown(struct net_device *dev)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
 
+	stmmac_stop_all_dma(priv);
+
 	stmmac_release_ptp(priv);
 }
 

@@ -2970,9 +2972,6 @@ static int stmmac_release(struct net_device *dev)
 		del_timer_sync(&priv->eee_ctrl_timer);
 	}
 
-	/* Stop TX/RX DMA and clear the descriptors */
-	stmmac_stop_all_dma(priv);
-
 	/* Cleanup HW setup */
 	stmmac_hw_teardown(dev);
 

-- 
2.29.2