Re: [PATCH v9 net-next 01/15] doc: marvell: add CM3 address space and PPv2.3 description
From: Andrew Lunn <andrew@lunn.ch>
Date: 2021-02-07 21:31:09
Also in:
linux-arm-kernel, linux-devicetree, lkml
On Sun, Feb 07, 2021 at 08:38:43PM +0200, stefanc@marvell.com wrote:
quoted hunk ↗ jump to hunk
From: Stefan Chulski <redacted> Patch adds CM3 address space PPv2.3 description. Signed-off-by: Stefan Chulski <redacted> --- Documentation/devicetree/bindings/net/marvell-pp2.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index b783976..1eb480a 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt@@ -1,5 +1,6 @@ * Marvell Armada 375 Ethernet Controller (PPv2.1) Marvell Armada 7K/8K Ethernet Controller (PPv2.2) + Marvell CN913X Ethernet Controller (PPv2.3) Required properties:@@ -12,7 +13,7 @@ Required properties: - common controller registers - LMS registers - one register area per Ethernet port - For "marvell,armada-7k-pp2", must contain the following register + For "marvell,armada-7k-pp2" used by 7K/8K and CN913X, must contain the following register sets: - packet processor registers - networking interfaces registers
Hi Stefan Shouldn't there be an entry here describing what the third register set is?