[PATCH net] net: mvpp2: TCAM entry enable should be written after SRAM data
From: <hidden>
Date: 2021-02-01 09:37:16
Also in:
lkml
Subsystem:
marvell mvpp2 ethernet driver, networking drivers, the rest · Maintainers:
Marcin Wojtas, Russell King, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Stefan Chulski <redacted>
Last TCAM data contains TCAM enable bit.
It should be written after SRAM data before entry enabled.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Stefan Chulski <redacted>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
index 0b2ff08..f4a905f 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c@@ -29,16 +29,16 @@ static int mvpp2_prs_hw_write(struct mvpp2 *priv, struct mvpp2_prs_entry *pe) /* Clear entry invalidation bit */ pe->tcam[MVPP2_PRS_TCAM_INV_WORD] &= ~MVPP2_PRS_TCAM_INV_MASK; - /* Write tcam index - indirect access */ - mvpp2_write(priv, MVPP2_PRS_TCAM_IDX_REG, pe->index); - for (i = 0; i < MVPP2_PRS_TCAM_WORDS; i++) - mvpp2_write(priv, MVPP2_PRS_TCAM_DATA_REG(i), pe->tcam[i]); - /* Write sram index - indirect access */ mvpp2_write(priv, MVPP2_PRS_SRAM_IDX_REG, pe->index); for (i = 0; i < MVPP2_PRS_SRAM_WORDS; i++) mvpp2_write(priv, MVPP2_PRS_SRAM_DATA_REG(i), pe->sram[i]); + /* Write tcam index - indirect access */ + mvpp2_write(priv, MVPP2_PRS_TCAM_IDX_REG, pe->index); + for (i = 0; i < MVPP2_PRS_TCAM_WORDS; i++) + mvpp2_write(priv, MVPP2_PRS_TCAM_DATA_REG(i), pe->tcam[i]); + return 0; }
--
1.9.1