[RFC PATCH net-next 04/12] Documentation: networking: dsa: remove references to switchdev prepare/commit
From: Vladimir Oltean <olteanv@gmail.com>
Date: 2021-02-21 21:35:56
Subsystem:
documentation, networking [general], the rest · Maintainers:
Jonathan Corbet, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Vladimir Oltean <vladimir.oltean@nxp.com>
After the recent series containing commit bae33f2b5afe ("net: switchdev:
remove the transaction structure from port attributes"), there aren't
prepare/commit transactional phases anymore in most of the switchdev
objects/attributes, and as a result, there aren't any in the DSA driver
API either. So remove this piece.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Documentation/networking/dsa/dsa.rst | 30 ++++++++--------------------
1 file changed, 8 insertions(+), 22 deletions(-)
diff --git a/Documentation/networking/dsa/dsa.rst b/Documentation/networking/dsa/dsa.rst
index cb59df6e80f4..8fb0ceff3418 100644
--- a/Documentation/networking/dsa/dsa.rst
+++ b/Documentation/networking/dsa/dsa.rst@@ -430,14 +430,8 @@ SWITCHDEV DSA directly utilizes SWITCHDEV when interfacing with the bridge layer, and more specifically with its VLAN filtering portion when configuring VLANs on top -of per-port slave network devices. Since DSA primarily deals with -MDIO-connected switches, although not exclusively, SWITCHDEV's -prepare/abort/commit phases are often simplified into a prepare phase which -checks whether the operation is supported by the DSA switch driver, and a commit -phase which applies the changes. - -As of today, the only SWITCHDEV objects supported by DSA are the FDB and VLAN -objects. +of per-port slave network devices. As of today, the only SWITCHDEV objects +supported by DSA are the FDB and VLAN objects. Device Tree -----------
@@ -616,14 +610,10 @@ Bridge VLAN filtering accept any 802.1Q frames irrespective of their VLAN ID, and untagged frames are allowed. -- ``port_vlan_prepare``: bridge layer function invoked when the bridge prepares the - configuration of a VLAN on the given port. If the operation is not supported - by the hardware, this function should return ``-EOPNOTSUPP`` to inform the bridge - code to fallback to a software implementation. No hardware setup must be done - in this function. See port_vlan_add for this and details. - - ``port_vlan_add``: bridge layer function invoked when a VLAN is configured - (tagged or untagged) for the given switch port + (tagged or untagged) for the given switch port. If the operation is not + supported by the hardware, this function should return ``-EOPNOTSUPP`` to + inform the bridge code to fallback to a software implementation. - ``port_vlan_del``: bridge layer function invoked when a VLAN is removed from the given switch port
@@ -651,14 +641,10 @@ Bridge VLAN filtering function that the driver has to call for each MAC address known to be behind the given port. A switchdev object is used to carry the VID and FDB info. -- ``port_mdb_prepare``: bridge layer function invoked when the bridge prepares the - installation of a multicast database entry. If the operation is not supported, - this function should return ``-EOPNOTSUPP`` to inform the bridge code to fallback - to a software implementation. No hardware setup must be done in this function. - See ``port_fdb_add`` for this and details. - - ``port_mdb_add``: bridge layer function invoked when the bridge wants to install - a multicast database entry, the switch hardware should be programmed with the + a multicast database entry. If the operation is not supported, this function + should return ``-EOPNOTSUPP`` to inform the bridge code to fallback to a + software implementation. The switch hardware should be programmed with the specified address in the specified VLAN ID in the forwarding database associated with this VLAN ID.
--
2.25.1