[PATCH v3 net-next 0/3] qede: add netpoll and per-queue coalesce support

This is a followup implementation after series

https://patchwork.kernel.org/project/netdevbpf/cover/1610701570-29496-1-git-send-email-bupadhaya@marvell.com/

Patch 1: Add net poll controller support to transmit kernel printks
         over UDP
Patch 2: QLogic card support multiple queues and each queue can be
         configured with respective coalescing parameters, this patch
         add per queue rx-usecs, tx-usecs coalescing parameters
Patch 3: set default per queue rx-usecs, tx-usecs coalescing parameters and
         preserve coalesce parameters across interface up and down

v3: fixed warnings reported by Dan Carpenter
v2: comments from jakub
 - p1: remove poll_controller ndo and add budget 0 support in qede_poll
 - p3: preserve coalesce parameters across interface up and down

Bhaskar Upadhaya (3):
  qede: add netpoll support for qede driver
  qede: add per queue coalesce support for qede driver
  qede: preserve per queue stats across up/down of interface

 drivers/net/ethernet/qlogic/qede/qede.h       |  10 ++
 .../net/ethernet/qlogic/qede/qede_ethtool.c   | 134 +++++++++++++++++-
 drivers/net/ethernet/qlogic/qede/qede_fp.c    |   3 +-
 drivers/net/ethernet/qlogic/qede/qede_main.c  |  29 +++-
 4 files changed, 171 insertions(+), 5 deletions(-)

-- 
2.17.1