Re: [PATCH v2 net-next 2/3] skbuff: (re)use NAPI skb cache on allocation path

On Thu, Jan 14, 2021 at 1:44 PM Alexander Lobakin [off-list ref] wrote:

From: Dmitry Vyukov <dvyukov@google.com>
Date: Thu, 14 Jan 2021 12:47:31 +0100

quoted

On Thu, Jan 14, 2021 at 12:41 PM Alexander Lobakin [off-list ref] wrote:

quoted

From: Eric Dumazet <edumazet@google.com>
Date: Wed, 13 Jan 2021 15:36:05 +0100

quoted

On Wed, Jan 13, 2021 at 2:37 PM Alexander Lobakin [off-list ref] wrote:

quoted

Instead of calling kmem_cache_alloc() every time when building a NAPI
skb, (re)use skbuff_heads from napi_alloc_cache.skb_cache. Previously
this cache was only used for bulk-freeing skbuff_heads consumed via
napi_consume_skb() or __kfree_skb_defer().

Typical path is:
 - skb is queued for freeing from driver or stack, its skbuff_head
   goes into the cache instead of immediate freeing;
 - driver or stack requests NAPI skb allocation, an skbuff_head is
   taken from the cache instead of allocation.

Corner cases:
 - if it's empty on skb allocation, bulk-allocate the first half;
 - if it's full on skb consuming, bulk-wipe the second half.

Also try to balance its size after completing network softirqs
(__kfree_skb_flush()).

I do not see the point of doing this rebalance (especially if we do not change
its name describing its purpose more accurately).

For moderate load, we will have a reduced bulk size (typically one or two).
Number of skbs in the cache is in [0, 64[ , there is really no risk of
letting skbs there for a long period of time.
(32 * sizeof(sk_buff) = 8192)
I would personally get rid of this function completely.

When I had a cache of 128 entries, I had worse results without this
function. But seems like I forgot to retest when I switched to the
original size of 64.
I also thought about removing this function entirely, will test.

quoted

Also it seems you missed my KASAN support request ?

 I guess this is a matter of using kasan_unpoison_range(), we can ask for help.

I saw your request, but don't see a reason for doing this.
We are not caching already freed skbuff_heads. They don't get
kmem_cache_freed before getting into local cache. KASAN poisons
them no earlier than at kmem_cache_free() (or did I miss someting?).
heads being cached just get rid of all references and at the moment
of dropping to the cache they are pretty the same as if they were
allocated.

KASAN should not report false positives in this case.
But I think Eric meant preventing false negatives. If we kmalloc 17
bytes, KASAN will detect out-of-bounds accesses beyond these 17 bytes.
But we put that data into 128-byte blocks, KASAN will miss
out-of-bounds accesses beyond 17 bytes up to 128 bytes.
The same holds for "logical" use-after-frees when object is free, but
not freed into slab.

An important custom cache should use annotations like
kasan_poison_object_data/kasan_unpoison_range.

As I understand, I should
kasan_poison_object_data(skbuff_head_cache, skb) and then
kasan_unpoison_range(skb, sizeof(*skb)) when putting it into the
cache?

I think it's the other way around. It should be _un_poisoned when used.
If it's fixed size, then unpoison_object_data should be a better fit:
https://elixir.bootlin.com/linux/v5.11-rc3/source/mm/kasan/common.c#L253