Thread (78 messages) 78 messages, 6 authors, 2021-01-28

Re: [PATCH v2 2/3] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set

From: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Date: 2021-01-09 23:21:11
Also in: lkml

On Sat, Jan 09, 2021 at 08:14:47PM +0100, Pali Rohár wrote:
On Saturday 09 January 2021 15:46:01 Russell King - ARM Linux admin wrote:
quoted
On Thu, Jan 07, 2021 at 05:54:28PM +0100, Andrew Lunn wrote:
quoted
On Wed, Jan 06, 2021 at 04:37:48PM +0100, Pali Rohár wrote:
quoted
From: Russell King <redacted>

Some GPON SFP modules (e.g. Ubiquiti U-Fiber Instant) have set both
SFP_OPTIONS_LOS_INVERTED and SFP_OPTIONS_LOS_NORMAL bits in their EEPROM.

Such combination of bits is meaningless so assume that LOS signal is not
implemented.

This patch fixes link carrier for GPON SFP module Ubiquiti U-Fiber Instant.

Signed-off-by: Russell King <redacted>
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
I'd like to send this patch irrespective of discussion on the other
patches - I already have it committed in my repository with a different
description, but the patch content is the same.

Are you happy if I transfer Andrew's r-b tag, and convert yours to an
acked-by before I send it?

I'd also like to add a patch that allows 2.5G if no other modes are
found, but the bitrate specified by the module allows 2.5G speed - much
like we do for 1G speeds.
Russell, should I send a new version of patch series without this patch?
I think there's some work to be done for patch 1, so I was thinking of
sending this with another SFP patch. It's really a bug fix since the
existing code doesn't behave very well if both bits are set - it will
toggle state on every RX_LOS event received irrespective of the RX_LOS
state.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help