[PATCH v2] net: phy: realtek: Add support for RTL9000AA/AN
From: Yuusuke Ashizuka <hidden>
Date: 2021-01-10 09:02:52
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
RTL9000AA/AN as 100BASE-T1 is following: - 100 Mbps - Full duplex - Link Status Change Interrupt Signed-off-by: Yuusuke Ashizuka <redacted> Signed-off-by: Torii Kenichi <redacted> --- v2: - Remove the use of .ack_interrupt() - Implement .handle_interrupt() callback - Remove the slash from driver name --- drivers/net/phy/realtek.c | 81 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 99ecd6c4c15a..1312e0eeecfa 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c@@ -60,6 +60,9 @@ #define RTL_LPADV_5000FULL BIT(6) #define RTL_LPADV_2500FULL BIT(5) +#define RTL9000A_GINMR 0x14 +#define RTL9000A_GINMR_LINK_STATUS BIT(4) + #define RTLGEN_SPEED_MASK 0x0630 #define RTL_GENERIC_PHYID 0x001cc800
@@ -655,6 +658,71 @@ static int rtlgen_resume(struct phy_device *phydev) return ret; } +static int rtl9000a_config_init(struct phy_device *phydev) +{ + phydev->autoneg = AUTONEG_DISABLE; + phydev->speed = SPEED_100; + phydev->duplex = DUPLEX_FULL; + + return 0; +} + +static int rtl9000a_config_aneg(struct phy_device *phydev) +{ + return 0; +} + +static int rtl9000a_ack_interrupt(struct phy_device *phydev) +{ + int err; + + err = phy_read(phydev, RTL8211F_INSR); + + return (err < 0) ? err : 0; +} + +static int rtl9000a_config_intr(struct phy_device *phydev) +{ + u16 val; + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + err = rtl9000a_ack_interrupt(phydev); + if (err) + return err; + + val = (u16)~RTL9000A_GINMR_LINK_STATUS; + err = phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val); + } else { + val = ~0; + err = phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val); + if (err) + return err; + + err = rtl9000a_ack_interrupt(phydev); + } + + return phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val); +} + +static irqreturn_t rtl9000a_handle_interrupt(struct phy_device *phydev) +{ + int irq_status; + + irq_status = phy_read(phydev, RTL8211F_INSR); + if (irq_status < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + if (!(irq_status & RTL8211F_INER_LINK_STATUS)) + return IRQ_NONE; + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} + static struct phy_driver realtek_drvs[] = { { PHY_ID_MATCH_EXACT(0x00008201),
@@ -823,6 +891,19 @@ static struct phy_driver realtek_drvs[] = { .handle_interrupt = genphy_handle_interrupt_no_ack, .suspend = genphy_suspend, .resume = genphy_resume, + }, { + PHY_ID_MATCH_EXACT(0x001ccb00), + .name = "RTL9000AA_RTL9000AN Ethernet", + .features = PHY_BASIC_T1_FEATURES, + .config_init = rtl9000a_config_init, + .config_aneg = rtl9000a_config_aneg, + .read_status = genphy_update_link, + .config_intr = rtl9000a_config_intr, + .handle_interrupt = rtl9000a_handle_interrupt, + .suspend = genphy_suspend, + .resume = genphy_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, }, };
--
2.29.2