[PATCH 2/2] dt-bindings: net: phy: micrel: add LED mode behavior and select properties
From: Ivan Mikhaylov <hidden>
Date: 2020-12-09 14:00:53
Also in:
linux-devicetree, lkml
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add LED mode behavior and LED mode select properties which can be used in KSZ9131 PHY. Signed-off-by: Ivan Mikhaylov <redacted> --- Documentation/devicetree/bindings/net/micrel.txt | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt
index 8d157f0295a5..3022c979287a 100644
--- a/Documentation/devicetree/bindings/net/micrel.txt
+++ b/Documentation/devicetree/bindings/net/micrel.txt@@ -16,9 +16,16 @@ Optional properties: KSZ8051: register 0x1f, bits 5..4 KSZ8081: register 0x1f, bits 5..4 KSZ8091: register 0x1f, bits 5..4 + KSZ9131: register 0x1a, bit 14 See the respective PHY datasheet for the mode values. + - micrel,led-mode-select + See the respective PHY datasheet for the mode select values. + + - micrel,led-mode-behavior + See the respective PHY datasheet for the mode behavior values. + - micrel,rmii-reference-clock-select-25-mhz: RMII Reference Clock Select bit selects 25 MHz mode
--
2.21.1