Thread (8 messages) flat view 8 messages, 5 authors, 2020-12-10
STALE2076d

Revision v2 of 3 in this series.

Revisions (3)
  1. v2 current
  2. v3 [diff vs current]
  3. v4 [diff vs current]

[PATCH v2 1/2] net: dsa: lantiq: allow to use all GPHYs on xRX300 and xRX330

From: Aleksander Jan Bajkowski <hidden>
Date: 2020-12-06 13:29:33
Also in: linux-devicetree, lkml
Subsystem: networking drivers, networking [dsa], the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds

This patch allows to use all PHYs on GRX300 and GRX330. The ARX300 has 3
and the GRX330 has 4 integrated PHYs connected to different ports compared
to VRX200.

Port configurations:

xRX200:
GMAC0: RGMII/MII/REVMII/RMII port
GMAC1: RGMII/MII/REVMII/RMII port
GMAC2: GPHY0 (GMII)
GMAC3: GPHY0 (MII)
GMAC4: GPHY1 (GMII)
GMAC5: GPHY1 (MII) or RGMII port

xRX300:
GMAC0: RGMII port
GMAC1: GPHY2 (GMII)
GMAC2: GPHY0 (GMII)
GMAC3: GPHY0 (MII)
GMAC4: GPHY1 (GMII)
GMAC5: GPHY1 (MII) or RGMII port

xRX330:
GMAC0: RGMII/GMII/RMII port
GMAC1: GPHY2 (GMII)
GMAC2: GPHY0 (GMII)
GMAC3: GPHY0 (MII) or GPHY3 (GMII)
GMAC4: GPHY1 (GMII)
GMAC5: GPHY1 (MII) or RGMII/RMII port

Tested on D-Link DWR966 with OpenWRT.

Signed-off-by: Aleksander Jan Bajkowski <redacted>
---
 drivers/net/dsa/lantiq_gswip.c | 170 +++++++++++++++++++++++++++------
 1 file changed, 141 insertions(+), 29 deletions(-)
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 09701c17f3f6..4c8f611ed397 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -94,6 +94,7 @@
 /* GSWIP MII Registers */
 #define GSWIP_MII_CFG0			0x00
 #define GSWIP_MII_CFG1			0x02
+#define GSWIP_MII_CFG3			0xc3
 #define GSWIP_MII_CFG5			0x04
 #define  GSWIP_MII_CFG_EN		BIT(14)
 #define  GSWIP_MII_CFG_LDCLKDIS		BIT(12)
@@ -102,6 +103,7 @@
 #define  GSWIP_MII_CFG_MODE_RMIIP	0x2
 #define  GSWIP_MII_CFG_MODE_RMIIM	0x3
 #define  GSWIP_MII_CFG_MODE_RGMII	0x4
+#define  GSWIP_MII_CFG_MODE_GMII	0x9
 #define  GSWIP_MII_CFG_MODE_MASK	0xf
 #define  GSWIP_MII_CFG_RATE_M2P5	0x00
 #define  GSWIP_MII_CFG_RATE_M25	0x10
@@ -222,6 +224,7 @@
 struct gswip_hw_info {
 	int max_ports;
 	int cpu_port;
+	struct dsa_switch_ops *ops;
 };
 
 struct xway_gphy_match_data {
@@ -392,12 +395,19 @@ static void gswip_mii_mask(struct gswip_priv *priv, u32 clear, u32 set,
 static void gswip_mii_mask_cfg(struct gswip_priv *priv, u32 clear, u32 set,
 			       int port)
 {
+	struct device_node *np = priv->ds->dev->of_node;
+
 	switch (port) {
 	case 0:
 		gswip_mii_mask(priv, clear, set, GSWIP_MII_CFG0);
 		break;
 	case 1:
-		gswip_mii_mask(priv, clear, set, GSWIP_MII_CFG1);
+		if (of_device_is_compatible(np, "lantiq,xrx200-gswip"))
+			gswip_mii_mask(priv, clear, set, GSWIP_MII_CFG1);
+		break;
+	case 3:
+		if (of_device_is_compatible(np, "lantiq,xrx330-gswip"))
+			gswip_mii_mask(priv, clear, set, GSWIP_MII_CFG3);
 		break;
 	case 5:
 		gswip_mii_mask(priv, clear, set, GSWIP_MII_CFG5);
@@ -1409,12 +1419,40 @@ static int gswip_port_fdb_dump(struct dsa_switch *ds, int port,
 	return 0;
 }
 
-static void gswip_phylink_validate(struct dsa_switch *ds, int port,
-				   unsigned long *supported,
-				   struct phylink_link_state *state)
+static void gswip_phylink_set_capab(unsigned long *supported, struct phylink_link_state *state)
 {
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
 
+	/* Allow all the expected bits */
+	phylink_set(mask, Autoneg);
+	phylink_set_port_modes(mask);
+	phylink_set(mask, Pause);
+	phylink_set(mask, Asym_Pause);
+
+	/* With the exclusion of MII and Reverse MII, we support Gigabit,
+	 * including Half duplex
+	 */
+	if (state->interface != PHY_INTERFACE_MODE_MII &&
+	    state->interface != PHY_INTERFACE_MODE_REVMII) {
+		phylink_set(mask, 1000baseT_Full);
+		phylink_set(mask, 1000baseT_Half);
+	}
+
+	phylink_set(mask, 10baseT_Half);
+	phylink_set(mask, 10baseT_Full);
+	phylink_set(mask, 100baseT_Half);
+	phylink_set(mask, 100baseT_Full);
+
+	bitmap_and(supported, supported, mask,
+		   __ETHTOOL_LINK_MODE_MASK_NBITS);
+	bitmap_and(state->advertising, state->advertising, mask,
+		   __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port,
+					  unsigned long *supported,
+					  struct phylink_link_state *state)
+{
 	switch (port) {
 	case 0:
 	case 1:
@@ -1441,37 +1479,56 @@ static void gswip_phylink_validate(struct dsa_switch *ds, int port,
 		return;
 	}
 
-	/* Allow all the expected bits */
-	phylink_set(mask, Autoneg);
-	phylink_set_port_modes(mask);
-	phylink_set(mask, Pause);
-	phylink_set(mask, Asym_Pause);
+	gswip_phylink_set_capab(supported, state);
 
-	/* With the exclusion of MII and Reverse MII, we support Gigabit,
-	 * including Half duplex
-	 */
-	if (state->interface != PHY_INTERFACE_MODE_MII &&
-	    state->interface != PHY_INTERFACE_MODE_REVMII) {
-		phylink_set(mask, 1000baseT_Full);
-		phylink_set(mask, 1000baseT_Half);
+	return;
+
+unsupported:
+	bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+	dev_err(ds->dev, "Unsupported interface '%s' for port %d\n",
+		phy_modes(state->interface), port);
+}
+
+static void gswip_xrx300_phylink_validate(struct dsa_switch *ds, int port,
+					  unsigned long *supported,
+					  struct phylink_link_state *state)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+	switch (port) {
+	case 0:
+		if (!phy_interface_mode_is_rgmii(state->interface) &&
+		    state->interface != PHY_INTERFACE_MODE_GMII &&
+		    state->interface != PHY_INTERFACE_MODE_RMII)
+			goto unsupported;
+		break;
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+		if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
+			goto unsupported;
+		break;
+	case 5:
+		if (!phy_interface_mode_is_rgmii(state->interface) &&
+		    state->interface != PHY_INTERFACE_MODE_INTERNAL &&
+		    state->interface != PHY_INTERFACE_MODE_RMII)
+			goto unsupported;
+		break;
+	default:
+		bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+		dev_err(ds->dev, "Unsupported port: %i\n", port);
+		return;
 	}
 
-	phylink_set(mask, 10baseT_Half);
-	phylink_set(mask, 10baseT_Full);
-	phylink_set(mask, 100baseT_Half);
-	phylink_set(mask, 100baseT_Full);
+	gswip_phylink_set_capab(supported, state);
 
-	bitmap_and(supported, supported, mask,
-		   __ETHTOOL_LINK_MODE_MASK_NBITS);
-	bitmap_and(state->advertising, state->advertising, mask,
-		   __ETHTOOL_LINK_MODE_MASK_NBITS);
 	return;
 
 unsupported:
 	bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
 	dev_err(ds->dev, "Unsupported interface '%s' for port %d\n",
 		phy_modes(state->interface), port);
-	return;
 }
 
 static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
@@ -1500,6 +1557,9 @@ static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
 	case PHY_INTERFACE_MODE_RGMII_TXID:
 		miicfg |= GSWIP_MII_CFG_MODE_RGMII;
 		break;
+	case PHY_INTERFACE_MODE_GMII:
+		miicfg |= GSWIP_MII_CFG_MODE_GMII;
+		break;
 	default:
 		dev_err(ds->dev,
 			"Unsupported interface: %d\n", state->interface);
@@ -1614,7 +1674,7 @@ static int gswip_get_sset_count(struct dsa_switch *ds, int port, int sset)
 	return ARRAY_SIZE(gswip_rmon_cnt);
 }
 
-static const struct dsa_switch_ops gswip_switch_ops = {
+static const struct dsa_switch_ops gswip_xrx200_switch_ops = {
 	.get_tag_protocol	= gswip_get_tag_protocol,
 	.setup			= gswip_setup,
 	.port_enable		= gswip_port_enable,
@@ -1630,7 +1690,32 @@ static const struct dsa_switch_ops gswip_switch_ops = {
 	.port_fdb_add		= gswip_port_fdb_add,
 	.port_fdb_del		= gswip_port_fdb_del,
 	.port_fdb_dump		= gswip_port_fdb_dump,
-	.phylink_validate	= gswip_phylink_validate,
+	.phylink_validate	= gswip_xrx200_phylink_validate,
+	.phylink_mac_config	= gswip_phylink_mac_config,
+	.phylink_mac_link_down	= gswip_phylink_mac_link_down,
+	.phylink_mac_link_up	= gswip_phylink_mac_link_up,
+	.get_strings		= gswip_get_strings,
+	.get_ethtool_stats	= gswip_get_ethtool_stats,
+	.get_sset_count		= gswip_get_sset_count,
+};
+
+static const struct dsa_switch_ops gswip_xrx300_switch_ops = {
+	.get_tag_protocol	= gswip_get_tag_protocol,
+	.setup			= gswip_setup,
+	.port_enable		= gswip_port_enable,
+	.port_disable		= gswip_port_disable,
+	.port_bridge_join	= gswip_port_bridge_join,
+	.port_bridge_leave	= gswip_port_bridge_leave,
+	.port_fast_age		= gswip_port_fast_age,
+	.port_vlan_filtering	= gswip_port_vlan_filtering,
+	.port_vlan_prepare	= gswip_port_vlan_prepare,
+	.port_vlan_add		= gswip_port_vlan_add,
+	.port_vlan_del		= gswip_port_vlan_del,
+	.port_stp_state_set	= gswip_port_stp_state_set,
+	.port_fdb_add		= gswip_port_fdb_add,
+	.port_fdb_del		= gswip_port_fdb_del,
+	.port_fdb_dump		= gswip_port_fdb_dump,
+	.phylink_validate	= gswip_xrx300_phylink_validate,
 	.phylink_mac_config	= gswip_phylink_mac_config,
 	.phylink_mac_link_down	= gswip_phylink_mac_link_down,
 	.phylink_mac_link_up	= gswip_phylink_mac_link_up,
@@ -1859,7 +1944,7 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
 static int gswip_probe(struct platform_device *pdev)
 {
 	struct gswip_priv *priv;
-	struct device_node *mdio_np, *gphy_fw_np;
+	struct device_node *np, *mdio_np, *gphy_fw_np;
 	struct device *dev = &pdev->dev;
 	int err;
 	int i;
@@ -1892,10 +1977,28 @@ static int gswip_probe(struct platform_device *pdev)
 	priv->ds->dev = dev;
 	priv->ds->num_ports = priv->hw_info->max_ports;
 	priv->ds->priv = priv;
-	priv->ds->ops = &gswip_switch_ops;
+	priv->ds->ops = priv->hw_info->ops;
 	priv->dev = dev;
 	version = gswip_switch_r(priv, GSWIP_VERSION);
 
+	np = dev->of_node;
+	switch (version) {
+	case GSWIP_VERSION_2_0:
+	case GSWIP_VERSION_2_1:
+		if (!of_device_is_compatible(np, "lantiq,xrx200-gswip"))
+			return -EINVAL;
+		break;
+	case GSWIP_VERSION_2_2:
+	case GSWIP_VERSION_2_2_ETC:
+		if (!of_device_is_compatible(np, "lantiq,xrx300-gswip") &&
+		    !of_device_is_compatible(np, "lantiq,xrx330-gswip"))
+			return -EINVAL;
+		break;
+	default:
+		dev_err(dev, "unknown GSWIP version: 0x%x", version);
+		return -ENOENT;
+	}
+
 	/* bring up the mdio bus */
 	gphy_fw_np = of_get_compatible_child(dev->of_node, "lantiq,gphy-fw");
 	if (gphy_fw_np) {
@@ -1973,10 +2076,19 @@ static int gswip_remove(struct platform_device *pdev)
 static const struct gswip_hw_info gswip_xrx200 = {
 	.max_ports = 7,
 	.cpu_port = 6,
+	.ops = &gswip_xrx200_switch_ops,
+};
+
+static const struct gswip_hw_info gswip_xrx300 = {
+	.max_ports = 7,
+	.cpu_port = 6,
+	.ops = &gswip_xrx300_switch_ops,
 };
 
 static const struct of_device_id gswip_of_match[] = {
 	{ .compatible = "lantiq,xrx200-gswip", .data = &gswip_xrx200 },
+	{ .compatible = "lantiq,xrx300-gswip", .data = &gswip_xrx300 },
+	{ .compatible = "lantiq,xrx330-gswip", .data = &gswip_xrx300 },
 	{},
 };
 MODULE_DEVICE_TABLE(of, gswip_of_match);
-- 
2.20.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help