Thread (14 messages) flat view 14 messages, 4 authors, 2020-12-07

Re: [PATCH v8 3/4] phy: Add Sparx5 ethernet serdes PHY driver

From: Andrew Lunn <andrew@lunn.ch>
Date: 2020-12-03 21:54:06
Also in: linux-arm-kernel, lkml

+/* map from SD25G28 interface width to configuration value */
+static u8 sd25g28_get_iw_setting(const u8 interface_width)
+{
+	switch (interface_width) {
+	case 10: return 0;
+	case 16: return 1;
+	case 32: return 3;
+	case 40: return 4;
+	case 64: return 5;
+	default:
+		pr_err("%s: Illegal value %d for interface width\n",
+		       __func__, interface_width);
Please make use of dev_err(phy->dev, so we know which PHY has
configuration problems.
+static int sparx5_serdes_validate(struct phy *phy, enum phy_mode mode,
+					int submode,
+					union phy_configure_opts *opts)
+{
+	struct sparx5_serdes_macro *macro = phy_get_drvdata(phy);
+	struct sparx5_serdes_private *priv = macro->priv;
+	u32 value, analog_sd;
+
+	if (mode != PHY_MODE_ETHERNET)
+		return -EINVAL;
+
+	switch (submode) {
+	case PHY_INTERFACE_MODE_1000BASEX:
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_QSGMII:
+	case PHY_INTERFACE_MODE_10GBASER:
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (macro->serdestype == SPX5_SDT_6G) {
+		value = sdx5_rd(priv, SD6G_LANE_LANE_DF(macro->stpidx));
+		analog_sd = SD6G_LANE_LANE_DF_PMA2PCS_RXEI_FILTERED_GET(value);
+	} else if (macro->serdestype == SPX5_SDT_10G) {
+		value = sdx5_rd(priv, SD10G_LANE_LANE_DF(macro->stpidx));
+		analog_sd = SD10G_LANE_LANE_DF_PMA2PCS_RXEI_FILTERED_GET(value);
+	} else {
+		value = sdx5_rd(priv, SD25G_LANE_LANE_DE(macro->stpidx));
+		analog_sd = SD25G_LANE_LANE_DE_LN_PMA_RXEI_GET(value);
+	}
+	/* Link up is when analog_sd == 0 */
+	return analog_sd;
+}
What i have not yet seen is how this code plugs together with
phylink_pcs_ops?

Can this hardware also be used for SATA, USB? As far as i understand,
the Marvell Comphy is multi-purpose, it is used for networking, USB,
and SATA, etc. Making it a generic PHY then makes sense, because
different subsystems need to use it.

But it looks like this is for networking only? So i'm wondering if it
belongs in driver/net/pcs and it should be accessed using
phylink_pcs_ops?

	Andrew
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help