Lorenzo Bianconi wrote:

quoted

This series introduce XDP multi-buffer support. The mvneta driver is
the first to support these new "non-linear" xdp_{buff,frame}. Reviewers
please focus on how these new types of xdp_{buff,frame} packets
traverse the different layers and the layout design. It is on purpose
that BPF-helpers are kept simple, as we don't want to expose the
internal layout to allow later changes.

For now, to keep the design simple and to maintain performance, the XDP
BPF-prog (still) only have access to the first-buffer. It is left for
later (another patchset) to add payload access across multiple buffers.
This patchset should still allow for these future extensions. The goal
is to lift the XDP MTU restriction that comes with XDP, but maintain
same performance as before.

The main idea for the new multi-buffer layout is to reuse the same
layout used for non-linear SKB. This rely on the "skb_shared_info"
struct at the end of the first buffer to link together subsequent
buffers. Keeping the layout compatible with SKBs is also done to ease
and speedup creating an SKB from an xdp_{buff,frame}. Converting
xdp_frame to SKB and deliver it to the network stack is shown in cpumap
code (patch 12/12).

Couple questions I think we want in the cover letter. How I read above
is if mb is enabled every frame received at the end of the first buffer
there will be skb_shared_info field.

setting mb bit the driver notifies the current xdp_frame is a "non-linear"
one and the skb_shared_info is properly populated. As you said below,
the info is per-frame, so we can receive linear frames (mb = 0) and
non-linear ones (mb = 1). For a linear frame we do not need to access
the skb_shared_info, so we will not introduce any penalty.

First just to be clear a driver may have mb support but the mb bit
should only be used per frame so a frame with only a single buffer
will not have any extra cost even when driver/network layer support
mb. This way I can receive both multibuffer and single buffer frames
in the same stack without extra overhead on single buffer frames. I
think we want to put the details here in the cover letter so we don't
have to read mvneta driver to learn these details. I'll admit we've
sort of flung features like this with minimal descriptions in the
past, but this is important so lets get it described here.

ack, I will add the info above in cover letter. Thanks for pointing this out.

Or put the details in the patch commits those are pretty terse for
a new feature that has impacts for all xdp driver writers.

quoted

In order to provide to userspace some metdata about the non-linear
xdp_{buff,frame}, we introduced 2 bpf helpers:
- bpf_xdp_get_frag_count:
  get the number of fragments for a given xdp multi-buffer.
- bpf_xdp_get_frags_total_size:
  get the total size of fragments for a given xdp multi-buffer.

Typical use cases for this series are:
- Jumbo-frames
- Packet header split (please see Google���s use-case @ NetDevConf 0x14, [0])
- TSO

More info about the main idea behind this approach can be found here [1][2].

We carried out some throughput tests in order to verify we did not introduced
any performance regression adding xdp multi-buff support to mvneta:

offered load is ~ 1000Kpps, packet size is 64B

commit: 879456bedbe5 ("net: mvneta: avoid possible cache misses in mvneta_rx_swbm")
- xdp-pass:     ~162Kpps
- xdp-drop:     ~701Kpps
- xdp-tx:       ~185Kpps
- xdp-redirect: ~202Kpps

mvneta xdp multi-buff:
- xdp-pass:     ~163Kpps
- xdp-drop:     ~739Kpps
- xdp-tx:       ~182Kpps
- xdp-redirect: ~202Kpps

But these are fairly low rates?  Also why can't we push line rate
here on xdp-tx and xdp-redirect, 1gbps should be no problem unless
we have a very small core or something? Finally, can you explain

I am using a marvell EspressoBin to develop this feature.
The Espressobin runs a cortex a53 and it is not able to push line rate.
The tests above want to prove there is no penalty introducing xdp multi-buff
for linear case (I will point out clearly in the next cover-letter,
the tests above refer to linear case (mb = 0))

why the huge hit between xdp-drop and xdp-tx?

not sure at the moment, the difference is not due to xdp multi-buff

I'm a bit wary of touching the end of a buffer on 40/100Gbps nic
with DDIO and getting a cache miss. Do you have some argument why
this wouldn't be the case? Do we need someone to step up with a
10/40/100gbps nic and implement the feature as well so we can verify
this?

It would be interesting to have the implementation on a high-end device.
IIRC intel folks are working on it for AF_XDP.

Regards,
Lorenzo

quoted

This series is based on "bpf: cpumap: remove rcpu pointer from cpu_map_build_skb signature"
https://patchwork.ozlabs.org/project/netdev/patch/33cb9b7dc447de3ea6fd6ce713ac41bca8794423.1601292015.git.lorenzo@kernel.org/

Changes since v2:
- add throughput measurements
- drop bpf_xdp_adjust_mb_header bpf helper
- introduce selftest for xdp multibuffer
- addressed comments on bpf_xdp_get_frag_count
- introduce xdp multi-buff support to cpumaps

Changes since v1:
- Fix use-after-free in xdp_return_{buff/frame}
- Introduce bpf helpers
- Introduce xdp_mb sample program
- access skb_shared_info->nr_frags only on the last fragment

Changes since RFC:
- squash multi-buffer bit initialization in a single patch
- add mvneta non-linear XDP buff support for tx side

[0] https://netdevconf.info/0x14/pub/slides/62/Implementing%20TCP%20RX%20zero%20copy.pdf
[1] https://github.com/xdp-project/xdp-project/blob/master/areas/core/xdp-multi-buffer01-design.org
[2] https://netdevconf.info/0x14/pub/slides/10/add-xdp-on-driver.pdf (XDPmulti-buffers section)

Lorenzo Bianconi (10):
  xdp: introduce mb in xdp_buff/xdp_frame
  xdp: initialize xdp_buff mb bit to 0 in all XDP drivers
  net: mvneta: update mb bit before passing the xdp buffer to eBPF layer
  xdp: add multi-buff support to xdp_return_{buff/frame}
  net: mvneta: add multi buffer support to XDP_TX
  bpf: move user_size out of bpf_test_init
  bpf: introduce multibuff support to bpf_prog_test_run_xdp()
  bpf: add xdp multi-buffer selftest
  net: mvneta: enable jumbo frames for XDP
  bpf: cpumap: introduce xdp multi-buff support

Sameeh Jubran (2):
  bpf: helpers: add multibuffer support
  samples/bpf: add bpf program that uses xdp mb helpers

 drivers/net/ethernet/amazon/ena/ena_netdev.c  |   1 +
 drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c |   1 +
 .../net/ethernet/cavium/thunder/nicvf_main.c  |   1 +
 .../net/ethernet/freescale/dpaa2/dpaa2-eth.c  |   1 +
 drivers/net/ethernet/intel/i40e/i40e_txrx.c   |   1 +
 drivers/net/ethernet/intel/ice/ice_txrx.c     |   1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |   1 +
 .../net/ethernet/intel/ixgbevf/ixgbevf_main.c |   1 +
 drivers/net/ethernet/marvell/mvneta.c         | 131 +++++++------
 .../net/ethernet/marvell/mvpp2/mvpp2_main.c   |   1 +
 drivers/net/ethernet/mellanox/mlx4/en_rx.c    |   1 +
 .../net/ethernet/mellanox/mlx5/core/en_rx.c   |   1 +
 .../ethernet/netronome/nfp/nfp_net_common.c   |   1 +
 drivers/net/ethernet/qlogic/qede/qede_fp.c    |   1 +
 drivers/net/ethernet/sfc/rx.c                 |   1 +
 drivers/net/ethernet/socionext/netsec.c       |   1 +
 drivers/net/ethernet/ti/cpsw.c                |   1 +
 drivers/net/ethernet/ti/cpsw_new.c            |   1 +
 drivers/net/hyperv/netvsc_bpf.c               |   1 +
 drivers/net/tun.c                             |   2 +
 drivers/net/veth.c                            |   1 +
 drivers/net/virtio_net.c                      |   2 +
 drivers/net/xen-netfront.c                    |   1 +
 include/net/xdp.h                             |  31 ++-
 include/uapi/linux/bpf.h                      |  14 ++
 kernel/bpf/cpumap.c                           |  45 +----
 net/bpf/test_run.c                            |  45 ++++-
 net/core/dev.c                                |   1 +
 net/core/filter.c                             |  42 ++++
 net/core/xdp.c                                | 104 ++++++++++
 samples/bpf/Makefile                          |   3 +
 samples/bpf/xdp_mb_kern.c                     |  68 +++++++
 samples/bpf/xdp_mb_user.c                     | 182 ++++++++++++++++++
 tools/include/uapi/linux/bpf.h                |  14 ++
 .../testing/selftests/bpf/prog_tests/xdp_mb.c |  77 ++++++++
 .../selftests/bpf/progs/test_xdp_multi_buff.c |  24 +++
 36 files changed, 691 insertions(+), 114 deletions(-)
 create mode 100644 samples/bpf/xdp_mb_kern.c
 create mode 100644 samples/bpf/xdp_mb_user.c
 create mode 100644 tools/testing/selftests/bpf/prog_tests/xdp_mb.c
 create mode 100644 tools/testing/selftests/bpf/progs/test_xdp_multi_buff.c

-- 
2.26.2