Andrew

On 10/19/20 4:55 PM, Andrew Lunn wrote:

On Mon, Oct 19, 2020 at 04:33:18PM -0500, Dan Murphy wrote:

quoted

Andrew

On 10/16/20 5:02 PM, Andrew Lunn wrote:

quoted

On Thu, Oct 08, 2020 at 11:23:47AM -0500, Dan Murphy wrote:

quoted

The DP83TD510E is an ultra-low power Ethernet physical layer transceiver
that supports 10M single pair cable.

Hi Dan

I think you are going to have to add
ETHTOOL_LINK_MODE_10baseT1_Full_BIT? We already have 100T1 and 1000T1,
but not 10T1 :-(

The data sheet says 10baseT1L.  Which is not there either and seems to be
the latest 802.3cg spec and has a greater max distance and used for IoT and
Automotive.

Hi Dan

Do you know anything about interropibility? Can a T1 and a T1L talk to
each other, if suitably close? I'm wondering if this device should say
it is both T1 and T1L? Or just T1L?

I personally don't know about interoperability my tests were T1L to T1L 
but I forwarded these questions to my HW PHY team.

Dan

    Andrew