[PATCH v3 devicetree 0/2] Add Seville Ethernet switch to T1040RDB
flat view
STALE2216d
SUPERSEDED
From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: 2020-10-01 13:20:43
Also in:
linux-devicetree, linuxppc-dev, lkml
Subsystem:
linux for powerpc (32-bit and 64-bit), the rest · Maintainers:
Madhavan Srinivasan, Linus Torvalds
Status: Superseded by v4 (posted 2020-10-02). [go to v4]
Revision v3 (3 revisions archived).
Revisions (3)
- v2
- v3 current [diff against previous]
- v4 [diff against previous]
Seville is a DSA switch that is embedded inside the T1040 SoC, and supported by the mscc_seville DSA driver inside drivers/net/dsa/ocelot. This series adds this switch to the SoC's dtsi files and to the T1040RDB board file. Vladimir Oltean (2): powerpc: dts: t1040: add bindings for Seville Ethernet switch powerpc: dts: t1040rdb: add ports for Seville Ethernet switch arch/powerpc/boot/dts/fsl/t1040rdb.dts | 107 ++++++++++++++++++++ arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 78 ++++++++++++++ 2 files changed, 185 insertions(+) -- 2.25.1