[PATCH net-next 2/5] net: phylink: allow attaching phy for SFP modules on 802.3z mode
From: Marek Behún <kabel@kernel.org>
Date: 2020-10-28 22:14:39
Subsystem:
ethernet phy library, networking drivers, sff/sfp/sfp+ module support, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Russell King, Linus Torvalds
Some SFPs may contain an internal PHY which may in some cases want to connect with the host interface in 1000base-x/2500base-x mode. Do not fail if such PHY is being attached in one of these PHY interface modes. Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King <redacted> --- drivers/net/phy/phylink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 5d8c015bc9f2..52954f12ca5e 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c@@ -1018,7 +1018,7 @@ static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy, { if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED || (pl->cfg_link_an_mode == MLO_AN_INBAND && - phy_interface_mode_is_8023z(interface)))) + phy_interface_mode_is_8023z(interface) && !pl->sfp_bus))) return -EINVAL; if (pl->phydev)
--
2.26.2