[PATCH russell-kings-net-queue v2 3/3] net: phylink: don't fail attaching phy on 1000base-x/2500base-x mode
From: Marek Behún <kabel@kernel.org>
Date: 2020-10-20 15:06:26
Subsystem:
ethernet phy library, networking drivers, sff/sfp/sfp+ module support, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Russell King, Linus Torvalds
Some SFPs may contain an internal PHY which may in some cases want to connect with the host interface in 1000base-x/2500base-x mode. Do not fail if such PHY is being attached in one of these PHY interface modes. Signed-off-by: Marek Behún <kabel@kernel.org> --- drivers/net/phy/phylink.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 6680de39e338..37b40db04526 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c@@ -1017,9 +1017,7 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy, static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy, phy_interface_t interface) { - if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED || - (pl->cfg_link_an_mode == MLO_AN_INBAND && - phy_interface_mode_is_8023z(interface)))) + if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED)) return -EINVAL; if (pl->phydev)
--
2.26.2