[PATCH v3 2/8] dt-bindings: net: nfc: s3fwrn5: Remove wrong vendor prefix from GPIOs
From: Krzysztof Kozlowski <krzk@kernel.org>
Date: 2020-09-10 18:46:58
Also in:
linux-arm-kernel, linux-devicetree, linux-samsung-soc, lkml, oe-linux-nfc
Subsystem:
networking drivers, nfc subsystem, open firmware and flattened device tree bindings, samsung s3fwrn5 nfc driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, David Heidelberg, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The device tree property prefix describes the vendor, which in case of S3FWRN5 chip is Samsung. Therefore the "s3fwrn5" prefix for "en-gpios" and "fw-gpios" is not correct and should be deprecated. Introduce properly named properties for these GPIOs and rename the fw-gpios" to "wake-gpios" to better describe its purpose. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- .../bindings/net/nfc/samsung,s3fwrn5.yaml | 24 ++++++++++++++----- 1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
index f43d31a2d94b..cb0b8a560282 100644
--- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml@@ -14,30 +14,42 @@ properties: compatible: const: samsung,s3fwrn5-i2c + en-gpios: + maxItems: 1 + description: + Output GPIO pin used for enabling/disabling the chip + interrupts: maxItems: 1 reg: maxItems: 1 + wake-gpios: + maxItems: 1 + description: + Output GPIO pin used to enter firmware mode and sleep/wakeup control + s3fwrn5,en-gpios: maxItems: 1 + deprecated: true description: - Output GPIO pin used for enabling/disabling the chip + Use en-gpios s3fwrn5,fw-gpios: maxItems: 1 + deprecated: true description: - Output GPIO pin used to enter firmware mode and sleep/wakeup control + Use wake-gpios additionalProperties: false required: - compatible + - en-gpios - interrupts - reg - - s3fwrn5,en-gpios - - s3fwrn5,fw-gpios + - wake-gpios examples: - |
@@ -55,7 +67,7 @@ examples: interrupt-parent = <&gpa1>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; - s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; - s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; + en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; + wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; }; };
--
2.17.1