[PATCH net] drivers/net/wan/x25_asy: Added needed_headroom and a skb->len check
From: Xie He <hidden>
Date: 2020-08-09 02:36:22
Also in:
lkml
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
1. Added a skb->len check This driver expects upper layers to include a pseudo header of 1 byte when passing down a skb for transmission. This driver will read this 1-byte header. This patch added a skb->len check before reading the header to make sure the header exists. 2. Added needed_headroom When this driver transmits data, first this driver will remove a pseudo header of 1 byte, then the lapb module will prepend the LAPB header of 2 or 3 bytes. So the value of needed_headroom in this driver should be 3 - 1. Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <redacted> --- drivers/net/wan/x25_asy.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index 84640a0c13f3..de7984463595 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c@@ -307,6 +307,14 @@ static netdev_tx_t x25_asy_xmit(struct sk_buff *skb, return NETDEV_TX_OK; } + /* There should be a pseudo header of 1 byte added by upper layers. + * Check to make sure it is there before reading it. + */ + if (skb->len < 1) { + kfree_skb(skb); + return NETDEV_TX_OK; + } + switch (skb->data[0]) { case X25_IFACE_DATA: break;
@@ -752,6 +760,12 @@ static void x25_asy_setup(struct net_device *dev) dev->type = ARPHRD_X25; dev->tx_queue_len = 10; + /* When transmitting data: + * first this driver removes a pseudo header of 1 byte, + * then the lapb module prepends an LAPB header of at most 3 bytes. + */ + dev->needed_headroom = 3 - 1; + /* New-style flags. */ dev->flags = IFF_NOARP; }
--
2.25.1