[PATCH] iscsi: qedi (qed_int.c) disable "MFW indication via attention" SPAM every 5 minutes

This is likely firmware causing this but its starting to annoy customers.
Change the message level to verbose to prevent the spam.

Signed-off-by: Laurence Oberman <redacted>
---
 drivers/net/ethernet/qlogic/qed/qed_int.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c
index b7b974f..d853eb9 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.c

@@ -1193,7 +1193,8 @@ static int qed_int_attentions(struct qed_hwfn *p_hwfn)
 			index, attn_bits, attn_acks, asserted_bits,
 			deasserted_bits, p_sb_attn_sw->known_attn);
 	} else if (asserted_bits == 0x100) {
-		DP_INFO(p_hwfn, "MFW indication via attention\n");
+		DP_VERBOSE(p_hwfn, NETIF_MSG_INTR,
+			"MFW indication via attention\n");
 	} else {
 		DP_VERBOSE(p_hwfn, NETIF_MSG_INTR,
 			   "MFW indication [deassertion]\n");

-- 
1.8.3.1

From: Laurence Oberman <redacted>
Date: Mon, 13 Jul 2020 17:15:41 -0400

This is likely firmware causing this but its starting to annoy customers.
Change the message level to verbose to prevent the spam.

Signed-off-by: Laurence Oberman <redacted>

"iscsi:" doesn't belong in this Subject line.

Please look at recent changes to this driver and what commit header
line subsystem prefixes and layout is being used.

Thanks.

On Mon, 2020-07-13 at 17:58 -0700, David Miller wrote:

From: Laurence Oberman <redacted>
Date: Mon, 13 Jul 2020 17:15:41 -0400

quoted

This is likely firmware causing this but its starting to annoy

customers.

quoted

Change the message level to verbose to prevent the spam.

Signed-off-by: Laurence Oberman <redacted>

"iscsi:" doesn't belong in this Subject line.

Please look at recent changes to this driver and what commit header
line subsystem prefixes and layout is being used.

Thanks.

Hi Dave, I will resend.
The challenge is that while the proposed fix is in qed_int.c it only
manifests when the ISCSI persinality is enabled on the card.

I will set as appropriate header but mention the qedi ISCSI connection
in the V2 of this patch.

Thanks
Laurence