[PATCH] iscsi: qedi (qed_int.c) disable "MFW indication via attention" SPAM every 5 minutes
From: Laurence Oberman <hidden>
Date: 2020-07-13 21:16:03
Also in:
linux-scsi
Subsystem:
networking drivers, qlogic ql4xxx ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
This is likely firmware causing this but its starting to annoy customers. Change the message level to verbose to prevent the spam. Signed-off-by: Laurence Oberman <redacted> --- drivers/net/ethernet/qlogic/qed/qed_int.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c
index b7b974f..d853eb9 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.c@@ -1193,7 +1193,8 @@ static int qed_int_attentions(struct qed_hwfn *p_hwfn) index, attn_bits, attn_acks, asserted_bits, deasserted_bits, p_sb_attn_sw->known_attn); } else if (asserted_bits == 0x100) { - DP_INFO(p_hwfn, "MFW indication via attention\n"); + DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, + "MFW indication via attention\n"); } else { DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, "MFW indication [deassertion]\n");
--
1.8.3.1